Questions & Answers for: agc gain setting

...AGC NG". whats going on here? thanks guys! [email protected] itis saying that the set automatic gain control control needs to adjust this is done by acessing the micro computer chip this can be ...

...manually tune to the channels with no problem, then I would go in and add then into memory manually. If not then exchange the set as it might have a bad tuner or an AGC (automatic gain control)

...drag into the centre of the set. are my settings wrong or has it anything to do with my digital relay signal. Many thanks. Brendan the problem maybe on sync or out of gain control , the AGC DOESNT ...

...video and component inputs, the picture is great and there is no flickering. Is there a RGB IC on the tuners? If so, what is the component label? its the Tuner rf gain voltage or AGC not set

...agc: auto white balance: auto program ae: off gain up: auto display/bright: +1-+3 after all that, hit the auto/manual switch again to set the camera into auto mode, the new settings should sort you ...

...MUST CHANGE AUDIO INPUT SETTINGS. BUT IF YOU HAVE NORMAL SOUND IN TYPICAL CONDITIONS THEN MUST BE LACK OF AGC (AUTO GAIN CTRL ).OTHER WAY IS TO USE EXTERNAL MICROPHONES..AND

...Gain Control (AGC) problem often caused by a dried up capacitor. You will probably need a schematic to go much further. This could be a problem in the tuner, IF, or video amplifiers. The following ...

...AGC ( auto gain circuit is possibly cranked uo too much and perhaps the squelch circuit needs adjusting also. If allelse fails trun up the sq. conrol. the local ( louder ) sIgnals will trigger those ...

...AGC mode. this allows you to hear the station. and static or both. like a Marconi radio of days of old. modern radios are programmed to blank weak stations. tis a fact. im a tech and tuned these ...

...gain-control (AGC) in the "Sound" preferences pane in the "System Preferences" panel, and set the level manually such that the input does not overload. As I mentioned above, the signal level is ...