Remote access to Digia II return error : Check Digia2.ecx installation. Current version is 1.0.1.0 Firmware on Digia II is 1.0.87

The current firmware is version 2.1.2. Use this link to get to the Canon download page. Scroll all the way down to “Drivers and Downloads”. Select “Firmware” and then the appropriate version for Windows or Mac.

https://www.usa.canon.com/internet/portal/us/home/support/details/cameras/support-dslr/eos-5d-mark-ii?subtab=downloads-firmware

First you need to be using Internet explorer as your browser as it does not support anything else.

Second, temporarly reduce your security settings in the browser. You may need to manually customize the setting rather than using the preset slider bar. Low/Medium/High etc.

The software is trying to install itself using active x but I believe the software is unsigned and will not install unless you reduce the security settings in the browser accordingly.

You will need to click the custom section, then find the box that says "download UNSIGNED activeX controls and chose the "PROMPT" setting. Hit apply, ok then restart the browser and try to log in to the DVR again.

Once the software installs on the machine and you are able to log in, reset the security setting back to the default levels. (THIS IS IMPORTANT)

DONT LEAVE THAT SETTING OR YOU MAY BE EXTREMELY VULNERABLE TO VIRUS, BROWSER ****** and TROJANS!!!!!!

I had exactly this issue and managed to resolve it by changing my monitor (i know, it sounds weird but i tried everything else).

My specific situation is that i am viewing the cameras across a Vmware View connection (essentially, fancy remote desktop). I think that the issue is somehow related to a DirectX / DirectDraw component not working correctly but i couldn't swear to it.The "fix" (i believe) cam when Windows 7 could readily identify the monitors by their model number rather than a "Generic Non-Plug & Play Monitor" like the original monitors were (I swapped out some old Dell 18" screens for sme shiny new Dell 22" ones).

Hope that helps point you in a useful direction.

Hurls = errors out (v o m i t s)
well you left all most key fact
linux what version distribution is it?

what browser did you use? or special remote app??????????
try firefox,
remove access how, exactly , tell that first.

Try removing the plugin and reinstall if it is there. It is possible the plugin did not install properly or it was blocked by security settings. You may have to lower security settings temporarily while you install and may have to enable active x settings.

I can't access via browser to the Digia II because appears the message: 'Please check the Digia2.ocx installation. Current version is 1.0.0.61.I'm using Internet Expplorer SP2

Real time clock, maybe? I'm not sure, but re-installing your current firmware may correct the issue. Check your firmware version on your K5 under "Settings>System>Firmware version", and you should be able to find links to MTP and UMS versions can be found in the forum.

I found this info.....it doesn't work for my model SV2000 ( WV806 ) , but it might for yours SV2000 ( WV10D6 )

With the recorder on stop, not on a menu screen. press on remote; CMSKIP-1-2-3. this will take you to a page labeled "F/W VERSION DISP" this will display the current firmware version and model numbers. To exit , press the "RETURN" button. DO NOT PRESS "OK" on remote , pressing "OK" will reset your player settings.

View disk manufacturer information:

with a disk inserted into recorder and stoped, not on a menu screen; press on remote CMSKIP-1-2-3 to go to firmware information screen.press the rigth arrow "->" once. this will display the disk media type and disk manufacturer ID. To exit, press the left arrow "<-" once to go to the firmware display screen, then press the "RETURN" button. DO NOT PRESS "OK" on remote , pressing "OK" will reset your player settings.

The WRT54G, WRT54GS, and WAP54G all must have the latest firmware versions available installed in order to connect with the WRE54G Wireless-G Range Expander. Here are the minimum firmware version requirements that you must meet: * WRT54G (all versions): at least firmware version 2.02.2 * WRT54GS: at least firmware version 2.07.1 * WAP54G (all versions) : at least firmware version 2.07 To Identify your WAP54G Version Number: To find out which version of the WAP54G you currently have, flip your Access Point over to look at its underside. Near the serial number label, near the Linksys© logo, you will see your model number and a possible version. Labels for the WAP54G version will look like one of the following: * WAP54G (no version means Version 1) * WAP54G ver. 1.1 * WAP54G v. 2 For WAP54G Version 1 and Version 1.1 Users ONLY: (if you have a WAP54G Version 2, you may proceed with the 2.07 or later firmware upgrade) NOTE: Before upgrading the WAP54G Version 1 and Version 1.1 models to firmware version 2.07 or later, make sure your Access Point?s current firmware is version 1.09.1 beforehand. The version 1.09.1 code performs an important OS upgrade for these versions of the Access Point -- it must be loaded before using later firmware.