Question about KDS Radius RAD-9p 19" Flat Panel LCD Monitor

1 Answer

KDS Rad-9p wont stay on

I have a 19 KDS Rad-9p LCD monitor and seems like something is over heating. I have somewhat of an electrical background and put a meter on it to check the power supply and that was fine. I was trying to find a schematic for this thing but i'm having a hard time. I not sure where else to look considering i'm going at kind of blind.

Posted by on

  • Anonymous Nov 27, 2008

    11/27/08, same problem, I"m out on web now looking for a schematic, as I do have a electronic background in repair. Thinking there is a thermister strapped to the board to protect from overheating and fire, and it is failing.

    Other possiblity is a chip is overheating and failing.

    Either way I will be oening it up tomorrow to begin tracing.

  • davegreenetn May 11, 2010

    my monitor has power,i can turn off my pc wait for a bit turn it on and the monitor will come on for asplit second and go blank



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My monitor will not work it will come on when the pc is cut on but it will not display

Posted on Sep 02, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Supply power

Hi u can find it vasai (W), mumbai, India. available it. ( If it serial adapter ) sadguru computer system

Dec 17, 2013 | KDS Radius RAD-7 17" Flat Panel LCD...

2 Answers

KDS Rad-7c struck by lightning

try to use another monitor power cord if is can turn on, otherwise immediately contact your monitor manufacturer to repair such device since it was struck by lightning

Dec 06, 2011 | KDS Radius RAD-7 17" Flat Panel LCD...

1 Answer

I bought a used KDS 17" color monitor, Rad-7,

I agree that the overheat was the supply being too small. Not only the voltage rating is wrong, but I'd bet the amperage is alsotoo low for correct operation. Check this link. I have bought power bricks from them for laptops, monitors, and power tools - all good quality without breaking the bank. They ship pretty quickly as well.

Jun 08, 2017 | KDS Radius RAD-7 17" Flat Panel LCD...

2 Answers

I have a KDS 5ms model 900W this was never used as my sister gave it to me since she was unable to get it to work. but like the others it won't stay on for more then 7 secs and you need to push the power...

These have problems with burning up transistors on the inverter side of the powerboard.
Sometimes they are fixable, sometimes not. It depends on which board is in it (they used 2 different styles)
I have done a few of these.
If you can open it up and send me a picture of the board to, I may be able to tell you more.

Aug 13, 2009 | KDS Radius RAD-9p 19" Flat Panel LCD...

1 Answer

RAD 9p shutting off Have checked all capacitors


The capacitors need to checked with an ESR meter. Althought capacitors sometimes bulge when they go bad this is not always true. Capacitors change value internally very easily when the conditions are right. High heat.

You can send this to my company for repair or if you need more help go ahead and email me.


Jul 23, 2009 | Computers & Internet

1 Answer

RAD-9p shuts off for no reason


It sounds like you have a monitor with a common problem. After a few years some LCD monitors will blow a power supply. The problem is caused by parts called capacitors overheating in the confined space of the monitor. If you are good at electronics repair/soldering you can usually fix the problem. Check out a few pictures on my web site You can take the back cover off your monitor and look for the bad parts,replace any that look like the pictures and your monitor should work fine. The capacitors do need to be installed with the correct + and - connections, note the stripe on the old one and insert the new one the same way. If you don't want to try the repair yourself we offer a repair service for $35 plus shipping.

I hope this helps, if so please rate my solution.

Corporate Computer
Over 21 years of computer and printer support/repair

Jul 23, 2009 | KDS Radius RAD-9p 19" Flat Panel LCD...

1 Answer

KDS Radius Rad-5

First try it with another computer to verify monitor vs computer. If it is the nonitor, it's probably not something she can handle. Gary(Honkity Hank)

Sep 18, 2007 | KDS Radius RAD-7 17" Flat Panel LCD...

Not finding what you are looking for?
KDS Radius RAD-9p 19" Flat Panel LCD Monitor Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top KDS Computers & Internet Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 2 Expert

151 Answers


Level 2 Expert

67 Answers

Are you a KDS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides