Hotpoint washer fault code FO7 what is it an how to repair

Hi, The link below is a user manual for a hotpoint ultima wf860 and below that are the error codes, I wish you all the best......CHEERS...

file:///C:/Users/Steve/Desktop/4992cbf9-f956-4127-bdab-caa958e02377.pdf <---"NEED TO COPY AND PASTE"

Hotpoint Washer Error CodesF01 - Electronic circuit board fault
F02 - Motor circuit fault
F03 - Temperature sensing fault
F05 - Waste pipe blockage or pump issue
F06 - Door lock fault
F07 - Electronic circuit board fault / heating circuit fault
F08 - Heater fault
F09 - Software fault
F11 - Pump circuit fault
F12 - Electronic control fault
F13 - Dryer temperature sensing fault (washer dryers only)
F15 - Heater control fault (washing machines and washer dryers)
F16 - Drum lock position sensor fault (top loading machines only)
F18 - Internal data error
F19 - Fan motor or heating fault (washer dryers only)

Flashing Lights & Error/Fault code - Repair

www.how-to-repair.com/.../washing-machine-with-all-the-lights-flashing...

Oct 25, 2014 - Now there may be some variances for older models, but there are 3 main types of board listed ... Tagged under: Ariston, Creda, error codes, flashinglights, Hotpoint, Indesit ... And can someone please enlighten me, thank you.

Identifying Hotpoint or Indesit Error Codes - YouTube

? 6:46
https://www.youtube.com/watch?v=aud14I0Zu9M
Aug 29, 2014 - Uploaded by eSpares
If your machine is stopping with flashing lights or a error code on the ... Lights on Washing Machine How to Repair Hotpoint,Ariston, Indesit ...

Flashing Lights on Washing Machine How to Repair ...

Hotpoint Indesit dishwasher flashing lights fault error codes ...

? 15:08
www.youtube.com/watch?v=FRLbrBPHcnE
May 3, 2015 - Uploaded by how-2-repair.com
http://www.how-to-repair.com/help/hotpoint-aquarius-fdm-dishwasher-flashing-lights-and-there-fault-codes ...

Hi Hayley,

Please help us help you. Expand on what is working and what is not. SO please add to your comments and repost.

First things first. Water is always a hazard with electricity. Please turn of the power source to your machine and do a fine cleanup, Take canister vacuum and get the hard reach places. A large box fan will help dry the machine and the floor. Pull the machine away from the wall. If possible lift the top off the machine to allow air flow and a panel cover for examination. a hair dryer can be used to dry electronic components in the event of an overload. Give it a chance.


If the machine restarts and is faulting. Here is a link to diagnose the coding Error Codes Hotpoint Service

F01 - Short circuit motor triac*


Here is a place for an online repair manual Free Online HOTPOINT Washing Machine Repair Manual


Here is the Hotpoint manual conversion site Download Manual Hotpoint Service

It appears you may need a new module if the cleanup does not clear out the code


http://www.ukwhitegoods.co.uk/help/fault-codes/laundry-fault-codes/3336-hotpoint-first-edition-hvl-series-washing-machine-and-washer-dryer-error-codes.html


Fare. Well.

see this mean :Usually means that either the touch pad or the oven control (also called clock or ERC) is defective and needs to be replaced. If this fault code cannot be cancelled, replace the oven control (also called clock or ERC), touch pad, or both.
Read more: http://www.appliancepartspros.com/repair-help/hotpoint-fault-codes.html#ixzz2gUdlkOnE
http://www.appliancepartspros.com

see the error mean:God bless you

Usually means that either the touch pad or the oven control (also called clock or ERC) is defective and needs to be replaced. If this fault code cannot be cancelled, replace the oven control (also called clock or ERC), touch pad, or both.
Read more: http://www.appliancepartspros.com/repair-help/hotpoint-fault-codes.html#ixzz2gUdlkOnE
http://www.appliancepartspros.com

Error F07 is indicating that the heater relay is stuck contacts could be welded together, or sticking.
Hotpoint recommend a service call be made.
If it is under 5 years old , then it should be covered by parts guarantee.
Plz rate my solution.
Thanks.

Have you checked to see if there are any blockages if so try to unplug it at the wall then back in try another programming cycle see if that helps

Fault code F7 is a heater relay fault