Hi could u tell me the addrees to change set up of my dlink dir 600 pls?

What is colors of lights in your dlink box

skype id : [email protected]

You do not need the disc. Using you browser, login into the router using the default IP 192.168.0.1 unless this has been changed and you should be able to configure your router.

You should be able to configure your router using the wizards. Login is ADMIN and Password is blank unless it was changed by the user.

You can find the user manual here: http://www.dlink.com/uk/en/home-solutions/connect/routers/dir-600-wireless-n-150-home-router

Reset the D-Link to sefault settings and reconfigure the SSID ang security key. This may help: http://www.dlink.com/us/en/home-solutions/connect/routers/dir-600-wireless-n-150-home-router

Sounds like electronics failure.

Try to get the latest firmware and install it for the dlink dir 600 wireless router.

Login in using your browser and go to the wireless settings and set-up a wireless password/key. Remember the key because each device will now need it to connect. You can also turn OFF Broadcast SSID and your network name will not be shown on anyone's device. You must remember the network name when using this method.

You do not need the disc. Using you browser, login into the router using the default IP 192.168.0.1 unless this has been changed and you should be able to configure your router.

Please check the router settings page

Make sure that your computer is able to go online through the modem.
If your computer is not able to go online through the modem then you will need to call ISP first.
If your computer is able to go online through the modem
then you need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

yes...you must change the D Link IP address and disable the DHCP server...use the IP add within the range of verizon dhcp server..192.168.1.1 is your verizons IP..to chANGE your di link IP connect to Dlink wired and not connected to any routers...type 192.168.1.1 to access configuration menu and you can change the setting