Error message HO7 - Panasonic DVD-RV32 DVD Player

This error code means that the motor that spins the disc is faulty.(spindle motor).This may not be economically repairable,given the price of new units.

email me your email address and i will show pic's how to my email address is [email protected] plzzz email me i will help but for now i will help step for step.
1)open your driver and pull out the plug.
2)nou the driver is open pull of the cover infront of the dvd player.
3)nou screw open your dvd player and take of the cover.
4)screw of the driver take it out.
5)nou clip of the lazzer and take it out gently.
The top resen of the HO7 is problem is it movement is dry use selicone spray to spray it there will be a thing that makes it spin but for screen shots plzzzz email me.PLZZZ RATE ME FOR NOU BECOUSE THIS PROBLEM IS NO MORE IT IS SOLVE FOR SHORE.

lazer is faulty

The spindle motor is faulty,you can spray wd40 into the motor where the spindle goes in,leave for a while.

This normally means the spindle motor is faulty.

Will read dic and play movie for about 10 mins and then stop and give me the error code H07. What is this and how do I get rid of it?

Here's the fix http://www.ledcar.com/pdvdh07/
I've replaced the motor once before on my 5 disk player to fix the HO7 error. The second time it appeared I tried the fix at the above link instead of going thru the hassel of the repair shop.

You may need to apply WD40 multiple times to cure the problem, depending on how stiff the rotation of the spindle feels. After the first application the player ran for about 5 minutes before the HO7 error reappeared. After the second application we watched an entire movie with no issues. we'll see how long this lasts. The fix was simple and hopefully wont have to be repeated soon.

Please chande your dvd lense you can purchase it from the market please note the lense number and may be the mechanisum problem.

check out this link I think this information will help you. http://www.ledcar.com/pdvdh07/

After calling Panasonic, they suggested pressing the reverse skip (<<) button, the pause button and the open/close button all at the same time. The DVD player will then say "initialize." Turn off the player and unplug it for about 1-2 minutes. Plug it back in and turn on the player and load a disc. If the HO7 error code pops back up, you need to take it to a dealership for service. Or, at the price of DVD players these days, just get a new one - which is where I'm going right now.