Can't login, url keeps flashing "https://login.yahoo.com/config/mail?.intl=us&.done=http%3A%2F%2Fus.mg4.mail.yahoo.com%2Fdc%2Flaunch%3F.gx%3D1%26.rand%3D9fh10qn3m4cvb" [email protected]

Most of the NETGEAR devices, except ReadyNAS products and Fully Managed switches, have the following default username and password:

• Username = admin
• Password = password
• • For older devices, password = 1234

To login to your NETGEAR router administration interface, open the following URL using your web browser -
http://192.168.1.1 or http://192.168.0.1 or http://www.routerlogin.net or http://www.routerlogin.com

Note: The actual URL changes by the product model.
You can sometimes find the login URL and default login information on a sticker on the bottom or back of the router.

Hi there, you can always change the settings for homepage/mainpage to your desire.
For Google Chrome browser:
Click the *wrench sign* - located on the right topmost of the page, right after the star. Choose *options* At the *homepage* section, select open this page. Copy this yahoo mail URL: https://login.yahoo.com/config/login - and paste to homepage.
For Mozilla Firefox browser:
If *tools* ( located left topmost of the page) is not showing. Click the *firefox* dropdown menu located ion left topmost of the page then choose *options* - it will open a window, click *General* tab. Copy this yahoo mail URL: https://login.yahoo.com/config/login - paste to *homepage* section, press ok.
If *tools* is showing, click it, the choose *options* - it will open a window, click *General* tab. Copy this yahoo mail URL: https://login.yahoo.com/config/login - paste to *homepage* section, press ok.
For Internet Explorer:
Click *tools* then *Internet Options* - It should open a window, click *General Tab* Copy this yahoo mail URL: https://login.yahoo.com/config/login - paste to *homepage* section, press ok.

If the default password has been changed then -
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ON untilthe LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your computer's LAN port, open a browserand enter the D-Link's configuration URL. OR open the browser on your laptopand enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter)
You can now go and configure the wireless settings. To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Connect a LAN cable from the D-Link to the LAN port on your computer.
Open a browser and enter the D-Link configuration URL
http:192.168.0.1
The default login = admin
The default PW = blank (just press Enter)

If you cannot login with the default password, then it was changed but you can reset the Linksys back to the default settings by pressing and holding the RESET button at the back of the router for 5 secs. with the power on until the LEDs flash.

Login to Zyxel Router Admin page using admin url. Refer user manual for login username, password and admin url. Type in the browser with the admin url and login. It opens to a router management page. In that click on the WAN tab and select the Enable Nat option. Thus you can open nat on your router

Try optimizing your browser by clearing the cache and the cookies and also temporary internet files

First you much login to your router. Open browser and enter the 192.168.1.1 in the URL section of the browser and press enter. Then the browser should bring up a login screen. If you have not changed the password, your login and password are admin and admin. Once you are into the setup, you need to look for the administration section of the setup. In there you can reset your password.

Please leave feedback if this solves your problem.

try using only --
http://login.facebook.com/login.php

download microsoft KB890830, install n run

also possibilies of:
u may not hv java runtime/adobe flash player/shockwave player installed..
the windows firewall is limiting the site..
may b ur antivirus is doing so(use a licensed n updated antivirus - i prefer AVG/Kaspersky)..
some spyware/trojan horse also may play foul..
sometime it also depends upon the browser u r using..
may b it is black-listed or restricted by using 'content advisor' (in case of ie) in ur computer by some user or the above..
may b it is being filtered by the 'phishing filter'..
there may b possibilities that the site may contain 'active content'..

Probably a cookie issue. Go to your Windows Internet Explorer window, if this is what u use to surf, open Tools, Internet Options, Privacy Tab, Select Sites, Look for MySpace url in list shown or type url for MySpace( myspace.com) in box and select allow (not block). Follow instructions in this area to keep this setting, then log in to your my space. Enjoy!

hi
this is not a password protection device and hence u cannot.
in case u want to add a software. this is possible by doing a local/freeware software. but no guranteee.
driver for 98 are not available by manufactueres, but u can find it freely on net . try url http://www.technical-assistance.co.uk/kb/usbmsd98.php.
bye and thanks,
gipi, mumbai