The information for my Linksys Wireless G 2.4 GHz Broadband Router has disappeared from my computer. I can't find the CD that came with it to re-install it. Is there some place that I can download that information?

GO TO Linksys .

If you need more help post back!
Thumbs and testimonial are welcome!

Check for 2.4 ghz antenna with similar connection type on E-Bay.

Are you trying to set up router ?
You can set up your router manually, without the CD.
Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Click Here for more information about the routers and network

Are you trying to set up router ?
You can set up your router manually, without the CD.
Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem
Then you need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Click Here for more information about the routers and network

You will need to check the wireless settings of the router
is there any computer connected to the router ?
If yes then you can open the router set up page on that computer.
Router set up page is the page where you can check all the wireless settings of the router.

If that doesn't work then upgrade the firmware of the router.
Firmware is the software of the router. After upgrading the firmware, it is recommended that you should reset the router and reconfigure the router.

Click Here to know more about router and network

Hi there, you don't need to install from the disk. Make sure your modem connects to your router and then the computer's LAN port is connected to the LAN port of the router. Open internet explorer and in the address line type 192.168.1.1 this will connect you to the router's setup. On older Linksys routers the default username is blank and the default password is "admin." On newer Linksys routers, both the default username and the default password are set to "admin." You then can find the wireless setup to configure your router. Make sure if you use a WEP code you use the same code from your computer's wireless adaptor. Good Luck...

Most Linksys routers works between 5V to 12V, If older versions 5V is safest. However if you provide exact model of the device we can provide information accordingly

I have moved and lost my CD to my Cisco "Linksys" wireless-G model WRT54GS please tell me how I can download the disk from somewhere???

Joyce

You more than likely do not need an installation CD to get this router running. For what it's worth, you can download specs, firmware upgrades, etc from the following link:

http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=1166859761879&packedargs=sku%3DWRT54GS&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=6187945678B01&displaypage=download#versiondetail

Hope this helps.