What is a cheap descaling substance for my incanto delux

hi,probably your machine is need decalcify. Try to turn on the hot water knob when you start the machine. Fill about 1 water glas with hot water from machine.If the ventilate is still appear-you must decalcifying machine with special liquid for descaling.

from the menu select descaling and open the steam knob. The machine is doing descaling.When descaling proces finish fill the water tank with frsh water and rinse from the hot water .When water finish you are ready to drink coffee.

Fill the container with a little water and turn on and wait until the tank is empty, then he goes to the wash, and you can finish the descaling

Here is the manual :) https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwjvmKv8z73WAhUMaVAKHd0eCxAQFggnMAA&url=http%3A%2F%2Fwww.applianceclinic.com.au%2Ffiles%2FIncanto_Deluxe_Manual.pdf&usg=AFQjCNEOD_WJ_VBfoJvOd6sPfiomXQeX0Q

Hello Dolls36,

I understand you have two questions the lever question I assume you are taking about the steam lever. The second question is how do you descale the unit.

Lets answer the first question first. The steam lever is not a lever but a knob. The knob is located on the right side of the unit.
1. Put container under steam tube turn knob downward to open until you get steam
2. Once you get steam turn knob upward to close
3. Put item you want to steam under steam tube and open valve back up to steam

Now to answer the question about how to descale the Incanto De Leluxe. When you are ready to descale the machine follow these steps.
1. Hold down the "x" button for 5 seconds, the machine will tell you it is ready to descale
2. Remove the filter
3. Fill the water tank with your descaling solution
4. Insert a container under the steam tube and open the steam valve
5. The machine will display descaling and finished
6. Then it will prompt you to fill tank with clean water for rinsing.
7. Press the "x" button once tank is full
8. Place container under steam tub and turn knob to open steam tube
9. When finished press "x" button one more time to confirm done
10. Replace water filter and fill tank

I hope that I have answer you question as for question 1 I assumed that is what you were asking about. However, if that was not the right question please post back to this tread and I will be more than happy to answer the question that you specify.

Thank you for choosing FixYa.com

Justin

Press and hold the lower right button for a few seconds,..the descaling light (the same button) will start flashing.Then follow the prompts on the screen.

try running a descaler threw your machine it may help cheers

Press and hold the descale button(lower right), it will light up.Then you can start the process. The machine will prompt the next step when the solution in the tank is used up. Have a go.

Hi,

Try to clean it with soap, if you are careful you can bend in the edge and take it off.

Use some glue on it when you put it back.
/Mirran

Try descaling it manually- by adding the descaler into the tank, letting the machine warm up and then open the water spout to fill one cup at a time. wait 15min. in between. Also clean brew group and grinder.