Keep getting error A6 - Brother IntelliFAX 4100 Laser Fax

There's this website www.reliable-store.com
They have books on ALL vehicles.
it covers wiring diagrams, electrical diagrams,
fuse diagram, torque specs, PCV, error codes, fault codes, service info, repair info, parts info, owner's/service/repair/
parts/maintenance manuals etc everything totally..
I have 1987 toyota 4runner model and I keep servicing and when needed repair it on my own. worth it !!!

This is what is written in my service manual for Error Code A6:

Error code 6A
Print Unable 6A
Turn the power off and then back on again.
Fuser unit failure (The side thermistor does not detect 60degreesC within the specified time.)

Hi there:
Look on eBay for an Owner's Manual or visit this links:

- audi-a6-service-manual-1998-2004
- 2004-audi-a6-owners-manual


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Normally they fix these, during Timing belt Replacement. For an Audi A6 3.0, the replacement interval guide is every 80000miles or 8 years. Repair time, remove and install is 5hours.
The cost of replacing a belt as part of a routine service could be as little as 5 to 10% of the repair cost following a belt failure.
So if you decide to keep your car, keep in mind to spend at least $1000 for maintenance. Mine was a 2000 Audi A6 T2.7. With two, turbochargers under both sides of the engine. I sold it with 80000miles, without changing the belt. Hope this may help.

If the car has been kept up you shound not have any worries. I can say that you should be ok for another 5000 miles or your next oil change, Just remember it's PREVENTIVE manintence and it's important to keep the car in top shape. hope this helps.

You will need to take it in for service.

Machine Error A6 is an indication of a mechanical malfunction and the unit will require servicing.

See this link on the Brother website:

http://www.brother-usa.com/FAQs/Solution.aspx?FAQID=100000005512&Sympt=Why+does+my+machine+display+the+message+Machine+Error+A6%3f+MEA6&Model=101&ProductGroup=5&Keyword=A6%20error&ProductID=MFC8220

IF YOU DON,T KNOW WHERE THE OIL&AIR FILTER ARE.IT WOULD BE BETTER FOR YOU TO TAKE THE CAR TO A LOCAL GARAGE AND GET THE WORK DONE THERE PLUS REPLACE THE OIL.WILL NOT COST MUCH.(GET A PRICE FIRST)..JUST KEEP BACK FROM AUDI DEALERSHIP GARAGES COST TO MUCH MONEY..

The a6 error is Scan Unable, So i assume your trying to scan something? Dont know how to fix it, But i figured id try to help by giving you the meaning to the error code.

Its the CIS unit. Part number LE7949001. $70 retail price.

did you get the solution to the problem u mentioned