At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: If an '' open heat error'' appears on the screen of...
Hello unplugged your machine and plug it back after 15 minute.sometime your problem is solve.didnt solve it you have to replace thermister wire it is on your heater unit
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Not nearly enough info. Does this error code appear on your printer? What kind of printer? Does this error appear on your computer screen? Can't help without details
Dear
low heat error means the temp. of fusser assy. was not achieved during the specified time. some times occur during low voltage supply and reset after s/w OFF-ON.
Open heat error means there is no electrical connection to the heater heater of the fusser assy. It has tob either repaired or replaced with new one. mostly the thermostat is responsible.
Thanks.
Turn off your printer, unplug the unit. Then plug it back in and turn it on. This error message means that the printer needs service. See the following URL for more details: http://www.xerox.com/office/PE120kb/,case=R1018019549
From looking at the manual it looks as if you have a faulty thermistor. When warming up, it has to heat up to at least 60 degrees. If it stays lower then 60 degrees celsius for over 35 seconds and doesn't reach 60 within that time frame then that would cause the open heat error that is happening on your machine.
open the back cover and you find a two wire connector just near ribbon connector it is thermistor connector the printer is sensing this connector as open or not connected explore and fix.
suman kumar INDIA
I have problem that SCX 4100 printer is erratic and turns on after being left powered on for sometime.
any help will be appreciated.
×