Cant get this to work tryed everything - Belkin (F5D7231UK4) Wireless Router

i have N81 8gb so i put everything on the mass memory directly.(even the msgs). i recieve "memory full" and "carousel/telephone/ sysAp- not enough memory 2 perform" i cant access the camera, clock, cant change the profile or change the time and date.the phone memory has 25MB it says they r used but actually they arent, i tried 2 install an manager application but it doesnt accept since the memory is full while actually it has nothing in use just empty folders which cant b deleted.clearing the cashe memory didnt work nor *#7780#. i even tried the *#7370# but it did not work either. i dont mind losiing everything on the phone or mass memory. i tried updating and reinstalling the software
led store

Probably because the HD80 is not 3D compatible...

Orion codes include: 0121, 0135 and 0035. Good luck!

do you know how to reset the bios? open the case and look for the jumpers on the motherboard. swop the jumpers around and reseet the CMOS battery. Try that and let me know:)
Alt try reseeting your RAM and Graphics card

Hi,
firstly, go and reset your router again. Then try to set it up again with your manual. Are you 100% sure that all the settings are correct? If so, enter them and everything should work ok. If not, try contacting your internet provider, if there is any special settings you need for your modem to work with your router.

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} If your phone is locked and you don’t know the password, you can try resetting the phone. Resetting the phone will erase everything on your phone, if you agree to reset it please follow the steps below:

1. Please remove the sim card on the phone.
2. Place the battery back in without the sim card.
3. Enter *2627*3855#, wait until you see “Insert Sim” message, then place the sim card back in. Hope this will work, but if not the phone needs reflash.

Hi,

May i ask have you tried a hard reset on your mobile?

If not, try typing *#7370#.
THIS WILL ERASE EVERYTHING ON YOUR PHONE!!!

So please make sure you have backed everything up before hand.

Hopefully this will help, if not, please feel free to tag me.

Regards

Karlos

[2nd] [ON], or let it sit for about 3 minutes

Try connecting a mouse and keyboard to the laptop and then start it with the top closed. Not sure if this will work on your model, but it works on a lot of laptops. This should force the PC to use your external monitor as the primary one.

hi there try this if it works for your phone but it will reset everything. input this code *2767*2878#
please give me feedback if it does'nt work.


peace!