How to set time on ge model 7-4852a clock? - Audio Players & Recorders

To set the clock on most GE microwaves:
1 With the microwave door closed, press CLOCK.
2 Touch number pads that reflect the time of day (1:45 would be 1, 4, 5).
3 On some newer models, indicate AM or PM for morning or evening.
4 Press CLOCK or START to lock in the time.
If you prefer not to display the time:
Disconnect the power for 30 seconds. After restoring power, do not set the clock. If your model has an ON/OFF clock display, you can choose not to have the time displayed. To choose this option, press the 0 pad for about three seconds. To Turn the display back on, press the 0 again.

http://products.geappliances.com/appliance/gea-support-search-content?contentId=17872

Quoted from link above:

To set the clock on most GE microwaves:

1. With the microwave door closed, press CLOCK.
2. Touch number pads that reflect the time of day (1:45 would be 1, 4, 5).
3. On some newer models, indicate AM or PM for morning or evening.
4. Press CLOCK or START to lock in the time.

If you prefer not to display the time:
Disconnect the power for 30 seconds. After restoring power, do not set the clock. If your model has an ON/OFF clock display, you can choose not to have the time displayed. To choose this option, press the 0 pad for about three seconds. To Turn the display back on, press the 0 again.

RANGE SETTING THE CLOCK NON-ELECTRONIC CLOCKS: To set the clock:

1. Push the center knob in.
2. Turn the clock hands to the correct time. If the Minute Timer pointer should also move, let the knob out, and turn the Timer pointer to OFF.

DIGITAL CLOCKS: To set the clock:

1. Push in the center knob of the Minute Timer.
2. Turn knob in either direction to set the Digital Clock numerals to the correct time

ELECTRONIC CLOCKS: To set the clock (models with Clock or Set Clock pad):

1. Press the Clock pad
2. Press the + / - pads or number pads (depending on model) to set the time.
3. Touch the Start pad. The time of day will show in the display.

To set the clock (models without Clock or Set Clock pad):

1. Press and hold the + and - pads for 3 seconds.
2. Press the + / - pads to set the time.
3. Touch the Start pad. The time of day will show in the display.

Didn't give a model number, but try the following:

For a mechanical clock, push the center knob in and turn the clock hands to the correct time. (If the Minute Timer pointer should move also, let the knob out, turn the Timer pointer to OFF.)

For a digital clock, push in the center knob of the Minute Timer and turn Knob in either direction to set the Digital Clock numerals to the correct time.

For an electronic clock, touch the Clock pad. Touch the number pad. Touch the start pad until the time of day shows in the display. Note: On double wall ovens, you can only set the Timer for one oven.

(From the GE website)

Didn't give a model number, but try the following:

For a mechanical clock, push the center knob in and turn the clock hands to the correct time. (If the Minute Timer pointer should move also, let the knob out, turn the Timer pointer to OFF.)

For a digital clock, push in the center knob of the Minute Timer and turn Knob in either direction to set the Digital Clock numerals to the correct time.

For an electronic clock, touch the Clock pad. Touch the number pad. Touch the start pad until the time of day shows in the display. Note: On double wall ovens, you can only set the Timer for one oven.

(From the GE website)

To Set the Clock
The clock must be set to the correct time
of day for the automatic oven timing functions
to work properly,The time of day cannot be
changed during a delayed cooking or a delayed
self-cleaning cycle,
1. Touch the Clock pad twice.
For models without a Clock pad:
Hold the + and - pads for 3 seconds.

2. Touch the + or - pads.
If the + or - pads are not touched within one
minute after Step 1, the display reverts to the
original setting. If this happens, repeat Step 1
and reenter the time of day.

3. Touch the Start/On pad until the time of
day shows in the display. This enters the
time and starts the clock.
To check the time of day when the display is
showing other information, simply touch the
Clock pad. The time of day shows until another
pad is touched.

http://www.managemylife.com/mmh/owner_manuals/138431/GE-Free-Standing-Electric-1112529L

To set the clock: 1. Press the SET button, the" : " will flash on the display 2. Press REV or FWD to set the time 3. AM or PM icon will show beside the time
The full manual can be found here, http://www.manualsonline.com/mdownloads/f8c57200-2d5f-c184-7944-ec02d8f9e065.pdf

Press the SET button
The ":" will flash.
Press REV or FWD to set time.

Entire manual:
http://www.manualsonline.com/mdownloads/f8c57200-2d5f-c184-7944-ec02d8f9e065.pdf

You can down load the manual on link below for free.

http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000045591.pdf

Good Luck and please rate 4 thumbs up for the free answer.

Download the manual here:
http://www.devicemanuals.com/guide/CD%20Player/RCA/RCA-75350-User-Manual-==TVRJMk1UZ3k=.html

Or open the battery compartment on the right side and press the clock button, >> or << to set time, and press clock button again to save.