Question about Washing Machines

1 Answer

Indesit w11 my washing machine is not broken, but just one of its function seems malfunctioning. It works ok at the beginning (mixing water and powder and rolling) but in about 15mins when it moves into next step such as rinsing spinning, it stops. Well, it doesnt stop but nothing happens except it makes stead sound, loike boooooooooo. can anyone help?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 158 Answers

Does it have a manual programme knob?if it does ,probably the internal contacts do not mesh so it stops at next step (programme)but the water pump keeps on making the noise.
try turning the knob by hand when machine stops before entering next programme cycle.if machine starts ,programme knob is the problem.

Posted on Mar 21, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water coming out of powder tray


Either your water level sensor is not working or if you can test this to be in order then the controller unit is not responding to the input from the level controller unit.
check this link: Controller check

Nov 20, 2013 | Indesit Washing Machines

1 Answer

How to rid of mould on and underneath rubber seal by door as making washing smell musty,model is INDESIT IWME12, thanks


when coming across this problemn i just tell my customers to put the machine on its hottest wash with a capful of bleach instead of powder this works ok good luck.

Jun 07, 2011 | Indesit Washing Machines

1 Answer

I have an indesit 1100 washing machine, but it does not take the softener in from the draw. i have cleaned the draw out nad tested the draw over the sink. it seems to work ok but once its back in the...


You need to clean the drawer box top, the holes get blocked and the pressure is only low on the conditioner section..you will need a lengthy object to clean the hole properly

Oct 05, 2017 | Indesit Washing Machines

1 Answer

Washing Mashine draw Wont Empty


check the screen on the valve where the hose connects to the washer, it may be clogged

Jul 07, 2009 | Washing Machines

1 Answer

Indesit WIA102 keeps draining, even when washing


Try lifting the drain outlet higher than it is, if it is too low the water will syphon out as it is filling, there by causing the problem you are experiencing, if that does not solve the prob, then it sounds like the pump is on all the time, this being the case, then it would appear that it has a faulty programmer.
Plz rate my solution.
Thanks.

Jan 22, 2009 | Indesit W 123 Front Load Washer

1 Answer

Indesit wax120 dial keeps turning and clicking when attempting a wash cycle. Does this on all cycles. Water enters the powder drawer then dial just starts to rotate and click on every setting.


these machines are a pain for this. you can only check the obvious - check filter not blocked, power up pump independantly and check it works, check heater element. if all these ok then fault is probably in module - if so, not worth repair

Jun 18, 2008 | Indesit Washing Machines

1 Answer

Indesit washeing machine


Karen, that was nice.........

May 31, 2008 | Indesit W 123 Front Load Washer

1 Answer

Wahing machine kitchenaid won't completely drain water


Check drain pump for any blockage.Pump accessible by removing lower panel,on bottom front of machine.Also try liquid instead of wash powder,and make sure that you are using automatic powder as other will foam in machine.

Apr 01, 2008 | Indesit W 123 Front Load Washer

2 Answers

Indesit W11 making grinding noise


I think you have a drumbearing problem.:)

Dec 30, 2007 | Indesit W 123 Front Load Washer

1 Answer

Indesit 1200 washer/dryer instructions


probable cause is just poor water flow from outside. switch water off. undo hoses and check not kinked. in each hose, there should be a gauze filter. clean this. look inside the valve spigot and check no dirt buid-up. put hoses in a bucket and check water flow is ok. remove drawer and check holes in top of box are clear

Jun 14, 2007 | Indesit WA 115 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

77499 Answers

Brad Brown

Level 3 Expert

16584 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...