Color unbalanced, uneven across the frame

Why do most security cameras shoot poor quality pictures ...

https://www.quora.com/Why-do-most-security-cameras-shoot-por-q... QuoraA good surveillance camera must have compact size, acceptable frame rate, ... Digital Cameras: How is the picture quality of the Samsung Galaxy S4 Zoom?

Why is DSLR cameras video quality so poor compared to ...

https://www.quora.com/Why-is-DSLR-cameras-video-quality QuoraWhy is DSLR cameras video quality so poor compared to still images at same resolution ... How does a digital camera work when taking a photo whose (image) ...

DigiTools: Communication, Information, and Technology Skills

https://books.google.com/books?isbn=0538741295

You do not say what exact model of printer you are using so any answer will be generic rather than specific.

Poor colour and black tone can be as a result of various factors:
1. Poor paper quality that you are printing on.
2. Poor ink or toner quality being used.
3. Use of Ink / Toner saving modes or software.
4. Worn or damaged printer components such as the fuser roll on a laser printer and other similar consumables with a limited page use life.
5. Poor quality content being printed, i.e. low quality images being printed at too high a print resolution.

The "ghost" image is "burned" onto the drum.

A laser printer is supposed to charge specific "dots" on the drum, and the toner-ink is supposed to stick only to those "dots", the paper is pressed against the drum, and then the "fuser" uses heat to "melt" the toner-ink onto the paper, to produce the printed page.

You need to replace the drum.

clean the print head 3 times,then realign the head .these are done by printer utility software given with the printer.
Even not ok.
Then Replace the New Catridge.(manufactured from within 3 of 4 months).because the ink will be dried with in 6 month.So Buy Carefully with Mfd Date.

Thank you

try component cables and see if you get the same results.

Bonjour.

Je sais ouvrir le Service Menu mais je ne connais pas la procédure.

http://www.cameravideo.net/forum/professionnels-de-limage-dvcam-beta-materiel-accessoires-gestion/15037-pixels-morts-panasonic-ag-dvc200.html

Sylvain Paradis

Return it for replacement

Did u use the original ink cartridges or compatible ones or refilled?

hotoPC 650 captures images in 24-bit color (16.7 million colors). Your pictures will not display maximum image quality if your monitor or computer's video controller doesn't support this color depth. Additionally, if your pictures are taken in 1154 x 864 mode, try increasing your video resolution above 640 x 480. You may need to upgrade your system to achieve the best possible image quality. If your pictures look better on the screen than when you print them out, you may need to upgrade your printer. An EPSON Stylus ink jet printer, for example, provides excellent image quality. If you used drag and drop to insert your pictures, they may appear grainy. Try importing them into your documents instead.