How to change door seal model hoover 1500 washing machine

go to www.fitness.manualsonline.com

God bless you

http://www.espares.co.uk/advice/washing-machines/a/7/1394/how-to-replace-the-door-seal-on-a-washing-mac.html
not the same machine as yours but should give you good idea of how to do the job

I searched for quite some time without success and I am Pretty good at finding things.

Contact Hoover using this link:
http://service.hoover.co.uk/spares

To order Hoover Genuine Spares & Accessories please call 08443 712758
Opening hours: Mon-Fri 8.30am - 5pm.

I could not even come up with the part number for the door. I did find the following:
1. Door Seal
2. Door Glass
3. Door Handle
4. Door Hinges

No luck on finding the complete door assembly.
Another alternative... if the Yorkshire area has an appliance recycling venter you may be able to find one there or in the classified ads "for parts only" But then your faced with disposing of the "junk."
I recommend you contact Hoover using the number or Lonk above and see what they can do for you.

I wish I could have done more for you but the whole door assembly just does not seem to be readily available.

Thanks for choosing FixYa,
Kelly

try pushing the door really hard if it opens check the door seal is on properly sometimes they pull off when removing clothes they can get trapped in hinges

could be a sign the bearing seal has gone u need to replace the bearings

You should have no trouble in doing this.
Depending on the model this can be done without removing the door seal.
If you cannot do it this way, then you will have to remove the door seal.
Hope this helps.

Hi.
You need ro remove the door seal from the front of the washer, this will then give you access to the door lock.
Good luck

yes most certainly, with leaks it is either the seals or cracks in hoses or rust holes in wash cylinder, but most likely the first too because of being a fairly new model