Universal remote code for sylvania tv model LC195SL8

1. Auto Code Search:
   • Turn on your Sylvania TV.
   • Press and hold the "Code Search" button on your Philips remote until the indicator light stays on.
   • Press the "TV" button on the remote to set it to control the TV.
   • Press the "Power" button repeatedly until the TV turns off.
   • Press the "OK" or "Enter" button to save the code.
2. Manual Code Entry:
   • Find the code for your Sylvania TV in the Philips remote control manual. If you don't have the manual, you may be able to find it on the Philips website.
   • Turn on your Sylvania TV.
   • Press and hold the "Code Search" button on the remote until the indicator light stays on.
   • Enter the code using the number buttons on the remote.
   • Test if the remote now controls your TV. If not, repeat the process with a different code.
3. Try Common Codes:
   • Some common Sylvania TV remote codes for Philips remotes are 0810, 1684, 1886, 2183, 1081, 1172, 1196, and 2049. Try entering these codes manually.

http://www.searspartsdirect.com/partsdirect/user-manuals/lc195sl8-sylvania-parts-tv+lcd-manual [] Control Panel

POWER (pl 1)
Press to turn the unit on and off.
INPUT SELECT (pl 3)

5. SETUP (p11)
Press to display the main menu.
6. infrared sensor window
Receives infrared rays transmitted from the remote
control.
7. power on indicator
Lights up when power is on.
8. standby indicator
Lights up in standby mode.

011,033,032

Search the model # of the REMOTE on www.google.com and a good portion of the manufactures have the Codes on thier sites for you.

Have you tried the search fuction,some of the remotes will search for a code that works.

I need to know what model the Unversal remote is. if it take a 4 digit code, you can try these:  0054, 0030, 0171, 0020, 0096

The code for the Sylvania 6432te 32" TV with the "Innovage products- Jumbo universal remote" is 189. you push and hold down the code search button, when the light starts to flash, hit tv, then the number "189". Finally, push the power button off on the remote control. if the tv turns off, then it worked. :)

To program a TV you can use the code search option. You do this by making sure the TV is turned on then point the remote at the TV then press the TV button once, then press and hold down the set button until you see the RED l.e.d light blink twice, then enter the code 991. Next press the power button then the TV button continue doing that until the TV turn off, when it does press the set button. Press the power button and the TV should turn on again.

I have a Sylvania LC427SSX and can not get the remote to work with the codes given by comcast. Does anyone know the correct code?

Yep me three. I just got a 2008 new Sylvania LCD and my remote will not work either.
I hate DirectV