Usb driver lost....help?

I have a singer quantum xl5000 embroidery machine. One Thing I can tell you is that you have to use the original cord that came with the Card writer. The cables that come with the card writer is a null modem Cable. It suppresses the modem signal through the computer to the cable. Then you can adapt it to say USB with another cable. You hook your new cable to the cable that came with the card writer. The original cable must be hooked to the card writer first. Then use an adapter or the new cable to hook to the computer. The new cables Must also have a fdti chipset in them. If you have all that your computer will be able to talk to the card writer and it will work. If it still doesn't work then your USB port needs a new driver. You might check the USB port first to make sure the drivers good. That's very simple just go into the control panel on your computer click system folder and go down through the list until you see the USB ports your porch should be listed. Just click on the file and see if it says working properly if it doesn't realize the driver

if you have misplaced the original disk, then you need to download the software Canon website , using the link below:

Official Canon Drivers and Software

Canon USA:DRIVER & DOWNLOADS

After downloading, unplug printer USB cable, and run thesoftware installer.
The software installer will tell you whento connect USB.

unhook the printer from the computer. install the drivers and then hook up the printer. They should self install.

Does the computer tell you it found new hardware?

Your drivers are here.
http://www.yournewdriver.com/Dell_AIO_Printer_946_2757.htm



Please rate FixYa Experts assistance, whether your rating is good or bad helps The experts immensely.
Thank you for taking the time.

hi,
CANON PIXMA MP160 All-In-One InkJet Printer has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....


http://www.canon.com/printer/prob676ijt65/solution

prito-i-20

Normal 0 You need to go to the manufactures site and download the VISTA driver for the camera. Then follow the info below to install the program.



Try disconnecting the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Hope this helps. Bud

Go to www.hp.com and select Drivers&Support downloads (or something along those lines).  There is an option to enter the type of computer you have, or to let it search for it.  Select the search option, with your printer hooked up to the USB port in your computer.   The site will register both your computer and printer.  For the printer, select "Driver Downloads."  You will find a list of drivers, one of them is an "All-in-one" download that can reinstall your printer if you don't have a disc.  Hope this helps!

The driver you can find here http://www.digitalwayinc.com/product/productview_dme.html?view=d

Hi,

You can download what you need from Fujifilm, here.

Simply buy an exexpensive Xd card reader. Insert your memory card in it; then, insert the reader into one of your PC's USB ports. Easy as can be without draining your camera's batteries.