When I wantb to print from a web site it isn,t working even though 2 days ago it was. It seems like it,s not configuring right.

The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

run disc cleanuo a few times start menu, all programs, accessories, system tools disc clean up/ c drive, all users. if you like right click on disc cleanup and set icon on desktop

hello allen team it seems to me that either your alternator isnt working properly and you will notice the battery light on andn it wont charge battery or you have bought the wrong battery as far as cranking amps i just bought the battery for my 04 endeavor and it had to be a 750 cca meaning cold cranking amps try to make absolutly shure that you have the right one there for the battery puts out the right amperage thus able to start the vehicle bye turning the starter motor at the corect rpm

You shouldn't get a different value even if you read it multiple times... unless it isn't configured properly. If it is a RS232 interface, you have to ensure it has the correct baud rate and data bits.

Perhaps tell us more about the barcode reader. 1) Interface type. 2) model#

It sounds as though off hand it isn't working properly. Does the value you get seem close to the actual barcode? Are the numbers displayed on the barcode? Are you using a proper USB/PS2 adapter? It will be one with both mouse and keyboard sockets, if not be made of cord, with a box in the middle, with a USB cord on one end, and PS2 mous and keyboard socket on the other.

hi there pauly 46 here

hi peg ed

here is web site to download service manual
http://www.kohlerplus.com/main_frame.asp

enter as guest

select kohler courage single, then scroll down to service manual , then select SM 20-690-01
(replaces tp-2548 a) and download a copy to your hard drive its 6.05 Mb

here is web site for toro manual
https://homeownersolutions.toro.com/portal/server.pt/community/product_center/225#productDetailsPage

under manuals , enter 74327 as model , time cutter z420 will come up in a list of 2

see if this will let you print anything

cheers

Inkjet printers need to be used frequently to prevent inkdrying out in the print head nozzles.
If the print head cleaning maintenance routine does not clear the blockages,then print head needs replacing, but it may be expensive.
It may be more cost effective to buy a later model and better printer thanreplace the print head.

According to this site http://www.argecy.com/xtnd100s.html it it supports the use of HP's JetAdmin/Web JetAdmin utility which will allow you to configure the IP address as well as other features.

"Features such as full support for HP JetAdmin/Web JetAdmin"


Utility located here:
http://h20338.www2.hp.com/Hpsub/cache/332262-0-0-225-121.html


That same site also has this information about the ExtendView utility which may help you as well.

TROY LAN Administration Tools

• ExtendView - 32-bit utility allowing most versatility and functionality available in network printing. Ability to view and configure print servers from unlimited number of views and quick and easy Windows IP address assignment are 2 key benefits. Features such as bulk configuration allow configuration changes for multiple print servers with simple steps. Save and restore feature allows a standard configuration to be saved and later recalled to restore same configuration
• WebView - web based configuration tool allows complete status and configuration changes simply by typing the print server's IP address into a standard web browser
• NetworkAlert - specialized Windows printer error utility providing proactive notification of printer problems through the use of SNMP traps
• ExtendNet Connect - serverless (peer-to-peer) printing for Windows 95/98. Excellent tool for small businesses and remote offices
• ExtendNet Connect NT - performance enhanced port monitor helps to improve the speed of data flow to the printer

I suffered from the same problem for a long time. We got Xerox Phaser 8550 and 8560 here. I choose on computer "tray 2" but the printer just print from tray 1 which is empty.

Today i figured it out! It's some configuration at the printer. So go to "Paper tray setp" -> "Tray 1 mode" and "Tray 2 mode" -> change to "static".

I figure it's like this. Before it was "dynamic", it probably means the printer decides it's better to use tray 1 even though you choose tray 2 - and this decision is stupid. Changing it to "static" fixes this.

Let me know whether this works for you too!

i know this is not perfect but...
paper runs out during printing... so
1)open the front cover
2)close the front cover
3)IT WORKs

If i helped you please rate me

clean the electrical contacts between cartridge and printer.