Will not turn on

try removing power source and opening door

Their is a fuse in the harness red wire that runs down from the control to the motor on the hydrowave washer. Hydrowave washer manual
Of course if yours isn't a hydrowave maybe you oughta post a model number. GE has several different styles.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

You can try resetting your washing machines operating sytem.
Turn the washer OFF
Standing on a dry floor, unplug the washer from the outlet
Wait several minutes
Replug the Washer into the outlet and turn it on.

Please let me know if this works for you.

if press button selection, make sure that no 2 buttons are pressed

you probably broke the door switch and the machine thinks the door is open. little piece on top of the lock catch. need to change the door switch

Your Door switch is faulty or, out of adjustment

its the power button its a common prob use a soldering iron and switch it with the load sinal button this happpens as the washer alallows moisture to get on the board as its not protected it will save u a ton of money and anyone can do it

defective timmer

lid switch possibly open circuit

REPLACED BELT WONT WORK