I need the setting up code for a sony bluetooth mex-bt2600

https://www.sony.co.uk/support/en/product/MEX-BT2600
Manuals and support site for sony

Check the main fuse, or the regulator transistor.

Get the manual for this CD player and read pages 15-16.

http://www.docs.sony.com/release/MEXBT2600.pdf

Good luck!

Welcome to fixya

Hello

I have a solution for this

Press Ok, Accept or replay so we may get started

Your pre-solution is coming up shortly

PLEASE REPLY OR LEAVE COMMENT TO CONFIRM YOU RECEIVED THIS EMAIL

My name is Bruce

If the Sony front end unit (stereo) has RCA jacks (Left and Right) in the back it's an input to the Xplode amp. If that's right then the Subwoofer putputs should plug or wire into the Xplode amp. I haven't hooked these up for some time but try a search on Youtube with the units you describe I'm more than 90% sure that there are videos there.

What make/model of car? I'm pretty sure that it is because your car has a factory amp that is powered by the factory radio. You will probably need a signal inverter and wiring harness or to splice into the wire; powering the factory amp and sending the signal to your radio.

having same problem did you fix this ??? :-)

does it have audio out when not hooked up in the car? take a seperate speaker and check 1 output if there is no sound ur looking at an ic problem sony is famous for no sound when hooked up in a car when there is a bad speaker

Hi and welcome to FixYa,

The user's manual for a Sony MEX-BT2600 is available here.

Good luck and thank you for using FixYa.

take off your headphones!