I have dvd disk with 6 epesodes of bonanza and the emerson ewd2203 player plays 4 epesodes and returns to first epesode

The laser lens is dirty. It is trying to read read read and it can't.

With the tray open, try cleaning the little lens thingie you see inside, at the bottom, with a moist cotton swab.

That otta fixya!

Put in a disk, press the dvd button, and play. Then put the TV on the correct input that the dvd is hooked to. Normally input Video 1 or 2 if using red-white-yellow cables. Channel 3 or 4 if using a Coax cable.

If you mean record from one tape to another, you'll need two VCR -
outout from first with the tape you want to play to the input of the seocnd with a tape to record.
Hit play on the first one and record on the second and off you go.

Hi

here is the links clickhere and this clickhere

Thnaks!

Sorry. Mostly not Try finilizing the disk.

• unplug the system then take the screws out from bottom and try to open the whole thing then you will not only get the dvd out, you can clean the lens with a Q-tip and rubbing alcohol. or unplug then plug back in and see if dvd comes out after plugging in.

hi connie steed,i see there is a problem with the dvd you are playing is dirty or scratched if not the your dvd player got a dirty lens.clean it with a lens cleaning disk u will get in your local market.have a nice time.
raj..

This is a site to download a free users manual

http://www.emersonaudiovideo.com/pdf/om/EWD2203.pdf

a switch outside or inside is broken, dirty, or somewhat that get inside a switch.

you're not telling much besides the fact that it doe'snt work. One thing to try offcourse is cleaning the lense inside, remove cover and gently brush dust off etc. If there's no dust build up, then I guess its just another emerson gone bad, NOT a rare occasion. Use the warranty if valid, otherwise consider if the repair cost is worth it, or if you rather getting another DVD player that you can count on. Good luck