How do I use Pyle 7200 monitor . I can't even connect via Bluetooth with my smart phone

Question edited for clarity and typos.

The Bluetooth isn't correctly paired. You are only half connected.

https://www.fixya.com/support/r26362721-pairing_bluetooth_devices

STEPS FOR CONNECTING WITH BLUETOOTH DEVICE Once paired you can play music from your Bluetooth device. You can also use the control buttons on the unit to select the tracks from your Bluetooth device.

1. Press MODE button to choose Bluetooth mode, display BLUETOOTH on the screen.

2. Search on the Bluetooth device name from others Bluetooth device and you can and the Bluetooth name - PYLEUSA

3. Select the PYLEUSA Bluetooth name and wait for the device to pair.

4. The PTA44BT will emit a noise confirming that the devices have successfully paired..

PTA44BT

Pyle USA http://manuals.pyleusa.com > PDF > PTA44BT PDF PTA44BT. 4 Channel Audio Amplifier. Multi-Source 1/4" Audio/Microphone inputs ... PyleUSA.com ... Read these instructions thoroughly before using this item.
9 pages

PYLE PTA44BT USER MANUAL Pdf Download ' ManualsLib

ManualsLib https://www.manualslib.com > ... > PTA44BT

View and Download Pyle PTA44BT user manual online. 4 Channel Audio Amplifier. PTA44BT amplifier pdf manual download.

..

If you Printer is home WiFi enabled and connected to the Router, and your phone is also connected to the WiFi, yes you can.

On the document look for the Print option, click it, then choose your Printer, and finally choose Print.

If you have the Motoactv you need the Motoactv app.

If you have the Moto 360 you need the Moto Connect app and or Android Wear app.

Both are available from the Google Play Store.

Neither device do you simply connect via Bluetooth.

Mark
Motorola Support

You can connaect a new smart phone to your car one of two ways. 1. Using the audio jack that is on the phone like you would put in headphones, or hands free device. 2. Sync it to a reciever via "Bluetooth" device. You do this like you would any other bluetooth device. (settings, bluetooth,manage devices, scan for new device, pair with device, done) ^^ Good luck.

Pyle PLCM7300BT Mobile Video Navigations Back up Camera Rear View...
Went to this site to find your particular product,it has a downloadable pdf manual whic will by default show you your setup.You may not have the green wire but if you read this manual you may be able to by process of elimination figure out your question.Pyle also has a very good technical support staff,been there done that ,they will also help you out.Good luck hope this helps you.

Where do I hook up the green wire on Pyle 7200 rear view camera

The green wire connects to the backup lights control. When the gear shift is in "Reverse" this acts as the switch on the "Monitor" and turns the system on so you can see what's behind you to safely "Backup" Hope this helps you.

This is not a solution. I have the same question. In addition, my unit shows blue screen and "no signal". Any guesses?

The passcode is 8888 I sure hope that someone has answered this before this time.