Where can I find a 42" marantz plasma TV base stand

I think this aftermarket stand will work. The reviews mention a couple of people using this with heavier lcd/plasma screens with no problems. Hope this helps!

http://www.amazon.com/Universal-Stand-Base-Wall-Mount/dp/B00DZVPFGU/ref=sr_1_5?ie=UTF8&qid=1399529274&sr=8-5&keywords=50+inch+universal+tv+stand

place you bought it may have them, best buy etc. good success, meder's tv service

I would suggest EBay

TvPartsGuy.com carries lots of original pedestal stands for LCD & Plasma Tv's.
https://www.tvpartsguy.com . use coupon code: fixya10 for 10% off your stand.

Tries websites like Ebay.com,Amazon.com to buy a new LCD or Plama tvs base stand or a used base stand.

try Ebay

GENTILITY lay that set face down on a table covered with a thick blanket. There should be 4 long threaded bolts near the bottom that fasten the legs of the stand inside the framework of the set.. Remove these and the stand should slide right out.

www.mcveyelectronics.com

The stand base part number is 310430814621 and is available for $71.58 from tritronicsinc.com

Dan

The base removes with the support arms that rise the height of the tv. remove all the screws from the back of the support arms and the base will slide out with the arms. you will need the holes open to mount to the wall mount