Problem is following - computer can't detect canon cameras, i mean eos and powershot a590is. drivers are installed from solution disk, included with powershot /v.33.0/. nothing works, not cameraWindow, nor direct transfer.

You may have to reinstall the Canon software suite that came with the camera. If you don't have it, it should be available online from Canon.

Hello Sir,

Please check if the drivers for the camera are installed on the machine. Normally the camera comes with the driver installation disk.

Steps to follow:

> Check the device manager to see if the camera is detected.
> Install the drivers for the Camera on the Machine.
> Link for the Driver is mentioned below :

http://driverscollection.com/?H=PowerShot%20A580&By=Canon

Thank You.

With your camera turned on and NOT connected to a computer.
-Press the menu button. -Use the arrrows to select tools at the top if camera is selected. -Adjust the arrows to select RESET ALL. -Press the FUNC. SET button.
The following cannot be reset. -The shooting mode. -DATE/TIME, LANGUAGE, & VIDEO SYSTEM options -White balance date recorded with the balance function.

Please get it at these links : www.nodevice.com/driver/.../Canon/Digital_Cameras.html
www.softwarepatch.com/utilities/powershot.html
www.usa.canon.com/...camera...digital...cameras/eos_digital_rebel

regards

Please get it at these links : www.nodevice.com/driver/.../Canon/Digital_Cameras.html
www.softwarepatch.com/utilities/powershot.html
www.usa.canon.com/...camera...digital...cameras/eos_digital_rebel

Regards, Jaya_GT

You didn't say what operating system you are using in your PC. If you have Windows XP or later follow these instructions. Since you apparently have the driver and software on a CD, unplug the camera from your PC, remove the camera software from the PC, remove the driver using the Device manager, restart the PC, then plug your camera into the USB port. Allow the operating system to find the correct driver when it notifies you of finding a "New Device". Normally that will solve the problem. If it does not, then reload the software.

Yes, you need to install the SX100 driver software as well. I wouldn't overwrite older versions of the Canon software, though, so do a selective install if you can.

Go to Canaon's web site and download the drivers for your camera for vista

I had same problem: ZoomBrowser had been working fine on XP sp2, but today I found it could no longer detect the camera. My guess is some operating system patch caused it to stop working. I finally got it working again by doing the following:

1) Go to http://software.canon-europe.com/ , select Powershot G1 as the product, and get the list of available updates.

2) Download and install the latest version of ZoomBrowser (6.0.1).

3) Download and (re-)install the USB driver ( Canon Digital Camera WIA Driver 3.9.1). It will probably tell you it's already installed, but continue with the install anyway. It will also warn you that the driver isn't certified for XP, but ignore that and continue.

4) Reconnect the camera to the USB port on the computer and put it into upload mode. *Now* a window should pop up with a selection of programs you can launch, including ZoomBrowser. Yay!

Hope this helps.

this is not a big issue.
after delting your DISK and installing your OS again removes al r programs from your computer. now you must install the camera EOS software in your system again.
this can be done by using the software disk which come with the camera. even if you dont have the disk the software can be donwloaded from canons site itself.
http://www.canon-asia.com/index.jsp?fuseaction=support&prod_type=dc&country=SG
this s the link for canons site.
thank you. if anythin s not clear means ask me