Garmin nuvi 40 the road display is gone, just the

Do a hard reset on your GPS. Download and install Garmin Express from Garmin. Plug your GPS into your computer. The software will identify your GPS and allow you to download new maps to it.

Garmin nuvi 50LM Boot problem ' POI Factory

www.poi-factory.com > Garmin talk

Aug 11, 2012 - Why won't my nuvi 30, 40, or 50 go past the Garmin logo screen when I turn it on? .... Just wanted to say thanks to Muell9K for the hard reset solution. ... get the Nuvi to start up with the screen that shows the picture of a Garmin ...


Crap... White Screen (nuvi 350)

May 11, 2008


garmin frozen?? (how do I reset?)

May 11, 2008


More results from www.poi-factory.com

How to Reset the Garmin nuvi 30, 40 and 50 with GPS City ...

? 0:51


https://www.youtube.com/watch?v=mujdSP-fM98

Jul 31, 2012 - Uploaded by GPSCity

In this video learn how to RESET the Garmin nuvi 30, 40, and 50GPS back to factory default settings. Back up all ... With the GPS unit off, press the bottom right hand corner of the screen. Turn the unit ... Show more. Show less.

Try a different power cord they seem to go bad after a period of time

Try connecting it to your computer via a USB cable. Then log on to Garmin's webiste and download a map update. Then you can put the map update on your GPS to replace the ones you lost. All Garmin customers get one free map update. After than it's about $40-$60 dollars for an update.

Are your maps updated?

If so the road you on a new road that hasn't been programed into the maps yet?

Could be a few things going on, lost satelite, or a new road.... word to the wise Always carry a road map in your vehicle, GPS is a great tool but not always 100% right especialy if your on a new road, Maps are updated I believe every 6 months or more.

Love my 760

If your nuvi series device is freezing on the map screen but still providing voice prompts there are two steps you can try to resolve the issue including updating the software using WebUpdater* and performing a master reset.

To download WebUpdater and update the software:

1. Go to http://www8.garmin.com/products/webupdater/howtoinstall.jsp
   
2. Follow the on screen instructions.
   

To perform a master reset on your nuvi series device: CLICK HERE

Warning: A master reset will erase all waypoints or favorites and will restore your unit to the default factory settings.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Yes, on a Nuvi 350 its under the flip up antenna, however you may have a defective LCD display. Please see this link:

http://www.sharc.net/gps_LCD_repair.htm


- Jim

Have you checked to make sure that the map is checked "ON"?

Please see this link:

http://www.sharc.net/discus/messages/6/75.html?1253054729

If the map is not checked "ON", you will only be getting the Base Map information (major highways - no street detail) and you wont be able to search for places of Interest (POI's).

- Jim

I can help you reset and fix your Garmin Nuvi 265WT.

Not starting, getting stuck on the flashing Garmin logo, or a message about not finding any maps, are indications that the firmware / system software inside your GPS has been corrupted.

There are three steps to take to get your Nuvi 265WT running like new:

1. Back up your Favorites.
2. Perform a Hard Reset.
3. Download and then run Garmin 265WT WebUpdater to replace its firmware / system software.

I hope that helps.
_____________________________
Nuvi 265WT Manuals here.

how can i get updates downloaded onto my garmin nuvi 200 series,i have it connected to pc but nothing is downloading,new roads,places,construction ect.