The letter o shows up when i press the i or p key

You probably have set keyboard repeat delay to "long"

You have press the NumLk key (number lock) and this changes the right hand keys to a number pad.
Press the NumLk key (also doubles as the ScrLk key to toggle the Number lock). it is near the F12 function key. When the NumLk has been enabled a LED light is turn on to indicate this function has been selected. Press the NumLk key again to turn off the Number Lock.

You must had accidentaly turn on your numlock function.
To turn this off find the key that looks lika lock with a number in it or a word numlck.
Press that together with your Fn key.


Good day.

ype 1

• During the code request mode, while pressing the DISP key, press and hold the Volume UP or DOWN key for 3 seconds until the "..." display disappears.
• Enter the security code with the Kenwood remote.

Type 2

• Press the "Auto" button and "Track up" on the face of radio at the same time until the four dash lines disappear.
• Enter the security code with the Kenwood remote.

Type 3: Model# DPX-4020 and DPX-4030

• Press and hold the 1 then the 6 preset keys until the display shows the letter C.
• Enter the security code with the Kenwood remote.

Entering Letters with a Kenwood Remoteo enter a letter with a Kenwood remote, press a button once for the first letter, twice for the second letter, and three times for the third letter. Press the Track Up or Next Track key to send the letter. To send the letter A, press the 2 key once then press the Track Up key. To send the letter B, press the 2 key twice then press the Track up key.
Finally, when all of the letters are entered, press and hold the Track Up button for 3 seconds.
The key sequence to enter the security code KCAR is:

• 5
• 5
• Track Up
• 2
• 2
• 2
• Track Up
• 2
• Track Up
• 7
• 7
• Track Up

The Kenwood should then enter tuner mode.
A Security Code Bug in Some Kenwoods

The issue is with the Toggle keys. Press the Caps lock and check if the same issue persists. Delete the files that are stored in %tmp%. reinstall the keyboard driver from device manager.

are you talking about how it shows the letters with numbers like .01, ABC2, DEF3, GHI4, n etc etc.. its like texting on a phone. lets say you are trying to use dogs as the password.. scroll over to the set of letters that has "DEF3" and press the x button on your psp the input screen will show u the letter "d" if u press the x button again it'll show the next letter which will be "e" and so on. so go back to the letter d by pressing x few times. next go to the set of letters MNO6 and press the x button to scroll to "o". notice when u move from one set of letters to the next it'll go to the next space in the series of the word. and now finally to the set of letters GHI4 and press x and u should get the word "dog" in your input display. to input a space hit the triangle button.. to go back hit the square button. hope this helps

Storing a Name and Number in Memory
1. Press the STORE button on the handset, ENTER NUMBER is displayed.
2. Use the keypad to enter the phone number (up to 32 digits).
3. Press the SELECT button. The display shows ENTER NAME.
Telephone Operation
17
4. Use the touch-tone pad to enter a name (up to 21 characters). More than one letter is stored in each of the number keys. For example, to enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for the second letter L, and press the 1 key to insert a space between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for the letter T; press the 4 key twice for the letter H.
5. Press the STORE button again to save your selection. ENTER LOCATION is displayed.
6. Enter two digits to enter the location, ranging from 01 to 40. For example, to store the record in location #5, press “0”, “5”. After entering a valid location number, the record will be saved. If the memory location you selected is not empty, OVERWRITE? will show in the display. Press the STORE button again to confirm the current record and overwrite the old one or press the EXIT button to select another location.
7. To enter another name and number in a different memory location, return to step 1 and repeat the process.


Good Luck.

Depends upon the set but usually this could be done bay pressing the hash key(#) OR the star(*) key.

also try keep pressing these keys.

If helpful, kindly do Rate!

Regards,
Waqar.

With my IBM Thinkpad, I had to hold Shift+ScrLk to turn off Number Lock.

Try this. Memory The handset can store up to ten 24-digit numbers with up to 15-character names in memory for quick dialing. This memory feature is in addition to the CID memory log, which stores up to 40 CID records in the handset. Storing a Name and Number in Memory 1. Make sure the phone is OFF (not in TALK mode). 2. Press the mem button. 3. Press the desired memory location (0 through 9) or use Caller ID/vol (+ or to scroll to the desired memory location. NOTE: If the memory location is occupied, the memory location number and its contents show in the display. 4. Press the mem button again. The display shows ENTER NAME. NOTE: If you don?t want to enter the name, skip step 5. 5. Use the touch-tone pad on the handset to enter the name (up to 15 characters) and press the mem button to save. More than one letter is stored in each of the number keys. For example, to enter the name Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L. Wait for one second. Press the 5 key 3 times for the second letter L. Press the 1 key to insert a space between the L and the S. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for the letter T; press the 4 key twice for the letter H. 6. Press the mem button to save the name. The display shows ENTER TEL NUMBR. 7. Use the touch-tone pad to enter the telephone number you want to store (up to 24 digits). 8. Press mem again to store the number. You will hear a confirmation tone. NOTE: If you make a mistake press the del/chan button to backspace and erase the wrong character(s) or number(s). If there are any further questions or comments, please post here. Please rate this solution through fix-ya.com Thank you