Manual teraoka digi scale sm 25

hi

find link for manual sm320

https://www.petrame.com/wp-content/uploads/2017/07/Digi-sm110-Label-Printing-Scale-User-Manual.pdf

Free online operator manual and link to service manual below:

https://www.manualslib.com/manual/824194/Digi-Sm-100.html

Find one here

http://www.manualsonline.com/

This seems to be it:

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=10&ved=0ahUKEwiCwPD9i7PZAhXQl-AKHZJRA-0QFghaMAk&url=http%3A%2F%2Fwww.labelspec.com%2Fcms%2Fwp-content%2Fplugins%2Fdownload-attachments%2Fincludes%2Fdownload.php%3Fid%3D838&usg=AOvVaw1JkITKe6ypDt16rsATWV3E

please preform the following procedure
Calibration
1. Place the scale on a leveled surface & turn off the scale.
2. Press and hold the "MODE" key and ON/OFF key until the LCD
displays a random number.
3. Now release both keys and press the ON/OFF key once. The
display will read "CAL" and then "1000.0".
4. Place a 1,000g weight on the center of the platform and wait 3 to 4
seconds. The LCD display reads "PASS", then "1,000.0g". Remove
the weight and turn off the scale.
5. Calibration is complete and the scale is ready for use.
check this link for manual:
Untitled Page

see if this will help you its for a DIGI SM-300 scale but it might just work for you..
http://www.lvsip.com/Manuals/Digi/SM-300%20Service%20Manual%20Edition%206.pdf

I have the operators manual for the SM-25, but not a programmers manual

Hi, have you solved your sm300 problem? I can calibrate for you. :)

try removing battery if this does not work you have a faulty weight sensor