It sounds like it has been overloaded. See if there is a calibration procedure in your user manual. If not, ask the supplier.
For those of you who have been asking for scale manuals, there are some here:
***********************************
All of these manuals can be downloaded at:
http://the-checkout-tech.com/
Acom JW-1C User
Acom PC-100 User Programming
Acom PC-300 User
Acom PW-200 User
Acom SI-100W User
Avery Berkel IX-110 User
Avery Berkel IX-202 User
Avery Berkel IX-212 User
CAS AP Service
CAS LP-II User
CAS PD-1 User
CAS PD-II User
CAS SW Service
CAS TP Service
CAS TP-II Service
Digi SM-90 Operation Programming
Ishida AC-2000 User Service
Ishida ASTRA User Service
Ishida BC-3000 User Service
Ishida SR-2000 Service
TEC H-9100N User
TEC SK-1100 User
TEC SL-2200 User
TEC SL-57 User
TEC SL-57N User
TEC SL-59 User
TEC SL-6600 User
TEC SL-9000-ESB User
TEC SL-9000-ESB-X User
TEC SL-9000-FFB User
TEC SL-9000-LSB User
TEC SL39 User
TEC SL39N User
TEC SL47 User
TEC SL4700 User
TEC SL5900 Programming
TEC SL66 User
Try removing battery if this does not work you have a faulty weight sensor
SOURCE: My bathroom scales ww35cha stopped working, i
you have 4 button on this model
1 tap the scale to start, it show 0.0
2 tap set to set person and height, age ...( use set, up, down buttons )
done
when start use
1 tap scale to start , show 0.0 again
2 tap user again and again to choose your user
3 wait after it show your height, age, then it show 0.0 step on the scale and you're done.
i've been through becuase my friend lost his instruction manual.
Now it wook
Have Fun
[email protected]
1,749 views
Usually answered in minutes!
×