Canon gp 160 check printer error message what does it mean

Canon PIXMA MP180 All-In-One InkJet Printer
Error 5B00

You might have to uninstall the printer restart your computer then reinstall your printer
click start control panel administrative tools computer management device manager scroll to ports(COM&LPT) + to expand you should see a communication port and Ecp printer port

you might see a yellow? ! question exclamation mark or a red X this will mean you need to install a new driver for this device right click you will have options to update driver,disable,uninstall or select properties again you will have the similiar options also you can troubleshoot the device

hope this helps

Canon GP 405 error E805 E805 (The fan rotation is faulty.)
suspect is feeder fan (FM1) or reversing guide cooling fan (FM9).
try Check

fixing is the problem . u have to check it for open thermistor

Hi you can try
Solution:

1. Turn on the machine
2. Press MENU
3. Press SCAN COPY SCAN to enter service mode
4. USE > to got to NVRAM ACCESS
5. Set ABS-M LEVEL to 0
6. Set ABS-P LEVEL to 0
7. Press STOP to EXIT

All The Best: Pineworks

That is a scan lamp error on all Canons that I know of. Check continuity on the lamp. Then check the in line fuse. It could also have a shorted scan cable.

press reset botton for 5 sec

Unfused Image
The printed image is not fully fused to the paper. The image rubs off easily

e000007 is related to the fuser..you need to change the fixing film or clean the sensor

is your printer connected with a serial cable, if so, you may have to install the printer and software again, but if you are connected via usb and this is the given error then there is a connection fault as, you may already know that LPT1 is not a usb connection but serial cable.