I hit the source button, and now my screen is blank with hdm1 in corner

you might have feedback on your HDMI cable. when connecting the cable make sure there is no spark. if there is you have a floating earth somewhere and the HDMI port could be damaged.

The TV remote has a button for that. Input Select or Source or SEL. However simply turning off anything except the firestick should make it work. I presume the firestick came with a remote. Simply turning it off and on from that should do it. Make sure you can see the firestick when you press the buttons.

If you have flat screen t.v. go to the menu button and it should give options such as hdm1, hdm2, audio video hdm1, is cable you use the volume up and down button to select.

I believe that is the display or exit button.when you find the correct button, the display will cycle through a few formats and then disappear. JVC is a lot like Sony in that you better never lose your remote control.

hit the source button again that is for your scat press down to 1 HD should get you back on.

Hey! We have a Samsung so it's prob not exactly like yours, but I thought it may be close enough. When our TV does this it's compliments of our 2.5 yr old.
........so on mine........
*Remote*
Hit [SOURCE]
choose - HDM1 satellite STB

*Side of the TV*
On mine you just press the side there's no "button"
It's SOURCE too. I just press it until the snow goes away.

Hope this some!! =)

Not sure if yours is the same but Philips codes work with Skyworth and if you hit the TV/AV button on the side of the TV and the table of options should come up. And then with the channel +or- go up and down till you are on HDM1 or where ever you want and then touch the TV/AV again when you are there.

Hello check the cable box connections to see what type of connection you are using for television, if you are watching in HD then you might of changed the video input or source button was hit by mistake.

unplugged tv!!!!

Have you tried to click the source button on the tv? It is the second button from the bottom on the right hand side of the screen.

I doubt your tv/monitor is turning off, it just isn't getting any input. D-Sub is the "pc monitor part".

Try clicking that button, give it sec, the hit it again. It will go through all of it inputs. If TV is what you are trying to find, it is directly after the Video input (green letters, top right hand side of the screen.) Keep hitting the button until TV shows up.

Good Luck!