Question about Mitsubishi WD-52525 52" Rear Projection HDTV

1 Answer

Lamp Indicator is Red

I have a Mitsubishi WD52525 and the lamp indicator turned red. I ordered a new lamp from Mitsubishi and was able to easily install it. I received the same result with the lamp indicator. I was able to see the old and new lamp turn on for a few seconds before going black before the indicator turned red. I sent the new lamp back to Mitsubishi and received my money back as it is supposedly defective. I'm wondering if I should try 1 more lamp or just consider the TV dead as I do not want to spend over $200 to fix a TV. Thanks for any assistance

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 8,617 Answers

Its much more likely that your getting a 34 error which is a lamp abnormality vaused by defective capacitors on the power board. You can get the V26 DLP power PWB repair kit at the following link that should repair the issue. Chances are your old lamp is still good.
http://servicemanuals.vstore.ca/product_info.php/pName/mitsubishi-v26-dlp-power-pwb-repair-kit/cName/repair-kits

Posted on May 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi 52'' TV Model WD52525


U restart the tv,u hear alots of clicking?That mean the Ballast is dead or have problems,that why ur picture lamp not sustaning the picture.Replacing the Ballast might or will sustance the picture.

May 18, 2010 | Mitsubishi WD-52525 52" Rear Projection...

2 Answers

Lamp Indicator is Red


a 41 error code for a short is usually caused by the power PWB. The power board will need to be replaced

May 30, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

How can I check if my new bulb is good or bad?


am sure the lamp is fine. first thing replace the lamp thermal sensor if this does not work check the lamp ballast (aka) lamp power supply.

Mar 18, 2009 | Mitsubishi WD-52525 52" Rear Projection...

2 Answers

No picture and no sound after replace lamp for Mitsubishi WD-51525


did you use an original mitsbishi lamp. did it slide in easily? one of the most common problems with a lamp replaement is pushing the connector away from the lamp if it doesn't slide in easily. unplug the set, take out the lamp and look with a flashlight to see if the connector is in place. if so put the old lamp in and see if it works. if it does then your new one is bad. if it doesn't then email me
ima_rm2000@yahoo.com with your number and we can talk more.
ken

Nov 10, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

WD-52525 Red lamp Indicator


usually with that model when you get a 34 eror code for lamp abnormality, its directly related to the capacitors on the Power Pwb. You can get the V26 Power PWB repair kit at the following link which repairs that issue. It contains the replacement High temp capacitors with the board location numbers and PWB identification as well as the service manual on CD. Heres the link its under their repair kit ctegory.
http://servicemanuals.vstore.ca/

Sep 04, 2008 | Mitsubishi WD-52525 52" Rear Projection...

2 Answers

Mitsubishi DLP - model #WD62725


We're under a service plan and had the guy out today. Same symptoms. He replaced the lamp and it didn't work and then called Mitsubishi. They said it is probably a very common capacitor problem on the power supply board. If you open the back and take a look you are likely to see bulging caps. Parts C9A37 and C9A38. The caps are cheap if you can find them, but the parts are really hard to find right now so Best Buy is actually replacing these for people under service plans rather than fixing them. You probably ignored the "warning signs" like we did and didn't think much of it when the TV said there was something blocking the air flow and the lamp was going to shut off. We now know this is a sign that the caps are getting too hot and need to shut down to cool off... Good luck! BTW, our guy said the repair will run you about $200 if you can't do it yourself.

Aug 12, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Mitsubishi DLP - model #WD62725


you have mention that after 10-15 seconds T.V starts up, will you give total description of the T.V within that 10-15 seconds?

Aug 11, 2008 | Mitsubishi WD-52525 52" Rear Projection...

2 Answers

WD-52525


I get the same red lamp led indicator, bought the lamp and I am unable to locate the lamp inside the tv, took the lower back panel out and don't see anything that i can make out the lamp housing. is hard to replace the capacitor and where is the power board located. thanks a mill.

Nov 22, 2007 | Mitsubishi WD-52525 52" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1213 Answers

The Knight
The Knight

Level 3 Expert

74459 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...