PF Flashes? Any ideas?

try unplugging it from power or tripping the circuit breaker(which might be easier). then re energize it and see if it resets. good luck.

Wild guess this is a portable air machine? with a tube out a window? Wild guess, there's a condensate "leak" where it shouldn't be. The tank drain might be blocked for some reason. or level of the machine or coils are dirty in spite of the filter.

A Completed guide about mobility scooter from
https://www.superfastscooters.com

Similar problem here - pump was set for a 58 minute normal cycle, I look in and see it is now showing 67. Hmm. Attempt to shut it off because it is just sitting there pumping and pumping. Power shuts off but pump keeps running and add garment light flashing red. Cannot open door (to add garment or not) Unplug the unit and the door will not open. Anybody got a clue what's up? I have a wash in, service is closed due to a storm today. Just bugs me that it is 6 months old and seems to act up a fair bit electronically.

PF just means your house has experienced a power failure since you last used the machine.

Unplug it for 40 minutes to reset.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

PF Power failure "PF" flashes to indicate that a power failure occurred while the dryer was running. Press HOLD TO START to continue the cycle, or press OFF/Pause to clear the display.

PF Power failure "PF" flashes if the washer loses power during a running cycle. The washer does not flash "PF" when it is first plugged in.

Press START to continue the cycle from the moment that power was lost.

OR

Press STOP/CANCEL to clear the display and completely cancel the cycle.

just press cancel ..pf means power failure ..if still not clearing probably control

Did you ever solve this problem.
I'm having the same issue and lost the remote.
Thanks.

PF means power failure
the power must have went out in your home some time during the day or night