Replacing the belt on a simpson 362 maxidry

Australian make not known to us in North America. This link might work better for you.

https://www.google.com/search?q=simpson+maxidry+1200s+manual

https://www.google.com/search?q=simpson+maxidry+1200s+settings

..

Hi, I owned a dryer a few years ago and the timer switch became faulty on that so i pulled it out and took the switch to a repair store where i bought a new timer switch.....CHEERS..

Two things to check. First, check for any lint in the screen or lint build up in the exhaust. this will restrict airflow. Secondly, check to see if the heating element is bad.

Hi there, There is a switch at the bottom of the dryer. It has a groove for the spring to fit around. Then the spring goes through the metal tag with the holes in the pulley. The pulleys 2 prongs then fits into the slot near the motor. The belt goes through the pulley and around the motor wheel. When fitting the drum, tape the belt at three points on the drum with the machine door facing down making installation easier. Once installed remove the tape. The dryer now works like a dream. See the attached photo. Good Luck!

the element is at the front of the unit.if u have no heat it is proberly your element, broken wire, timer or thermostat. if u have an electrical test meter i can tell how to test 4 faulty component. 90% of the time i have found it is the element . please reply 4 more help. element replacement is not too expensive.

when it comes to whitegoods old is good. your dryer will outlast most new ones. buy the new parts it will b lot cheaper than a new dryer. not much goes wrong with the old simpsons. please reply if u need more help

Hi I have a simpson eziloader 5kg Model: 39S500. I've just replaced the drum and put it all together but I have a spring that I'm not sure where abouts it goes can anyone help thank u

MOST SERVICE COMPANIES WILL HAVE A BELT, OR RING SIMPSON ON 131350
BEFORE YOU FIT THE BELT MAKE SURE THE CENTRE PULLY IT GOES ON SPINS FREELY- IF ITS TIGHT IT WILL RUIN THE NEW BELT.

Idler pulley and spring have come off while cleaning dust from inside cabinet a diagram whould be a great help as Im 500kms from nearest service place simpson maxidry 1000p Ray bushed