Dryers Logo

Related Topics:

Question about Electrolux Dryers

2 Answers

What is an e64 error code on electrolux dryer ewmed70jss?

Posted by Anonymous on

2 Answers

Justin Johnson

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I have the e64 error even after reset and I have replaced the heating element.. what do I need to do now?

Posted on May 27, 2019

Electrolux

  • Official Brand Answer
  • 4,342 Answers

Good Afternoon Friend,

I understand you are receiving an E64 code on your Electrolux dryer, model# EWMED70JSS, and want to know what it means. What this is stating is that there could be a possible issue either with the heating element or some wiring. It could also be a possible false error code. I suggest resetting your dryer, by either unplugging it or shutting the power of at your home's circuit breaker, for 3-5 minutes. Restore power and try any cycle. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully. Hope this is helpful.

-Best Regards-
WP

Posted on Jun 19, 2014

4 Related Answers

richroth

Richard Roth

  • 9472 Answers

SOURCE: frigidaire affinity electric dryer says error E 64, what does that mean?

Heater has an open circuit and need to be replaced. Here is the part you need.

Posted on Oct 21, 2012

protek480

Craig Butler

  • 1730 Answers

SOURCE: Electrolux dryer error code e61

There is a 'tech sheet' in the back pf the dryer. Unplug machine, Remove the access panel on the back to get to it. Reach in and it should be there. It will tell you how to do a button check. You have to enter a test mode through the buttons.
The E 61 is a stuck button.


Enter function test mode and perform key
stuck closed (active). (button) test to determine which button is at
fault. Carefully free the and perform the test
again. If button is free but the key struck code
still exists, replace electronic control.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c

Posted on Sep 25, 2009

Anonymous

  • 4323 Answers

SOURCE: I was drying and the

Hi

Error code E64 means Heater Open Circuit. This error appears when the Heating element or wiring to the heating element is defective. To clear the error code (s): Press and hold the far left key under the display and “cancel” buttons simultaneously for 3 seconds. If the error appears again then you’ll need to check heater coils and connections for open circuits. Use a multimeter to check the heater element, use Rx100 setting on the multimeter. It should display 30-33 K ohms as the resistance. If it is less than this or exceeds this limit then the element has gone bad and you would need to replace the element. Hope this helps...
Daniel

Posted on Sep 13, 2010

Anonymous

  • 1 Answer

SOURCE: error code on a Frigidaire affinity dryer E64

Heating element wire malfunction.

Posted on Dec 18, 2011

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I get rid of code? I have an Electrolux front load dryer model #EIMED55IIWO, with E 64 error code. When initially starting the dryer I cancel the code and start the dryer.

E64 error code Electrolux dryer! E64 fault code on your home Electrolux clothes dryer. What this code stands for is that you have a shorted heating element. Other Possible fault: Heater thermostat faulty: Wiring faulty; Electronic board faulty.
https://advancedappliancesolutions.com/e64-error-code-electrolux-clothes-dryer/
https://www.youtube.com/watch?v=ErDSsjVywwg


0helpful
2answers
0helpful
1answer
0helpful
1answer

E64 error code electrolux dryer

You have not specified Tumble dryer model so I can not say for certain that my answer is correct. Fault codes can sometimes vary depending on the platforms appliances because today some manufacturers release new models twice a year and thay have the absolutlly right to make changes and improve the efficiency of new appliances (also change fault codes).

E64 - Heater thermostat

  • Thermostat faulty (replace heater unit)
  • Heater unit faulty
  • Wiring faulty
  • Electronic board faulty.

Dado
5helpful
1answer

E64 code eletrolux dryer

Hello cordiapartin - Typically error code E64 indicates that the dryer has detected that the heater circuit is open. Contact a professional to move forward accurately to check the heater coils and connections for an open circuit. Depending on the diagnosis's, the heater might need replacing and/or wiring

1helpful
1answer

E64 error code

Hi gordsxbstn34 - Typically error code E64 indicates that the unit has detected that the heater circuit is open. Contact a professional to move forward accurately to check the heater coils and connections for open circuits. Depending on the diagnoses heater might need replacing and/or wiring

7helpful
1answer

Error code e64

Hello Gary Melton - Typically error code E64 indicates that the unit has detected that the heater circuit is open. Contact a professional to move forward accurately to check the heater coils and connections for open circuits. Depending on the diagnoses heater might need replacing and/or wiring
Not finding what you are looking for?

Open Questions:

22,894 views

Ask a Question

Usually answered in minutes!

Top Electrolux Dryers Experts

vince

Level 3 Expert

1705 Answers

Cindy Wells

Level 3 Expert

6611 Answers

NOEL
NOEL

Level 3 Expert

8604 Answers

Are you an Electrolux Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...