A31253 Accuset NoMar Tip - Stanley Bostitch Coil Framing Nailer

How to shut off alarm on ETC674 AccuSet LED alarm clock ?

is the valve broken? if not it may just need new orings and a good cleaning.

What kind of gun do you have? Try checking on ereplacementparts.com enter your model number and it should bring you to a parts breakdown. They should stock NoMar tips

Hello Nomar Dean,

Follow this link to download the software you need.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3301740&cc=us&dlc=en&lc=en&jumpid=reg_r1002_usen_c-001_title_r0003

Kind regards,
Ron.

If a kevlar piston (driver) ring is used instead of an ordinary O-ring there is no oil used but only a littlebit basic silicon-lubrication into the cilinder oks1110 or dc4 (Dow Corning) but no oil neccesary Most Senco's have kevlar these are gray flat (strips) rings with sometimes an little o-ring thereunder .

You don't state what your problem is with this nailer but here are some facts about this line of tools. There were five or six Accuset nailers & staplers put out by Senco and they were on the market for about six months. They weren't a very good tool and most were recalled. I have been in the pneumatic tool repair business for over three years and the only place I've found parts is on www.toolpartsdirect.com, but what they have is getting more and more limited.

Please be as detailed as possible in describing what problem you are having with this tool. Without knowing all I can do is furnish a parts diagram for you.

Senco A100MP diagram

go to senco.com then go to specs/manules..this toll was made by senco

oops, the above is the solution, not the problem, but read it anyway

TENGO EL MISMO PROBLEMA EN LA ACCUSET 1500 PLUS SI SABEN POR FAVOR QUE QUIERE DECIR ESTE ERROR, AGRADECERIA LA INFORMACION