Atjust time on a Pulsar vp4005 digital watch - Watches

Clearly, it is faulty and has some type of parasitic drain. All watch batteries should last a couple of years. My Seiko last for about 3 to 4 years. Return it to Pulsar or a repair agent for repair.

Pulsar Watches - Tell it your way

https://www.pulsarwatches.com.au
Service & Repairs Service Agents Watch Care FAQs Instruction Manuals · Contact. PULSAR. Pulsar. ©2021 Seiko Australia. All Rights Reserved.
‎Watch Care · ‎Customer Service · ‎Abbreviations · ‎Glossary

Pulsar Watches - Contact

https://www.pulsarwatches-europe.com Pulsar burst onto the world watch scene with the first ever LED watch. Ever since, the name has been synonymous with adventurous and leading edge design.

..

just put the hour hand forward or back 1 hour

Mate I hope this link helps....
http://www.ehow.com/how_5890599_set-time-pulsar-digital-watch.html

I don't know if the offer is still good after two years, but take a look here.If you just want to set the time, look here.

I don't know whether the offer is still good after two years, but take a look at this thread.If you just need to know how to set the time, look here.

mcdevito75 Here, Pulsar a quartz watch. If you lost the stem, the mechanism holding it into the watch maybe damaged, this mechanism also turns your Pulsar watch on / off. Best Bet, visit a small watch repair shop in your area, have them take a look at your Pulsar watch. You could replace the stem yourself but first you"d need the right size stem, (hard to get) then if the mechanism holding the stem in is damaged you"ve wasted your time. Your local small watch repair shop can let you know, and they usually don"t charge to have a look.

This is a test by FixYa Staff.

MODS - DO NOT REMOVE

Thank you!

Without knowing the model of the watch i would say you need a new battery. It is typical for this style of watch to have two batteries or one lithium battery. In either case the analog movement will drain faster than the digital portion of the watch and will stop working first.

I have a Pulsar watch and on the expandable band, the casing fell off and can't get it replaced unless we take off a link...To me this was too much trouble, time and expense...I won't buy another Pulsar! Too bad cause I thought it was a beautiful watch.

Had Pulsar analog watch. Couldn't set either day or date properly due to being unable to signify AM or PM. When days changed one or the other would be 12 hours off.
""googled" adjusting Pulsar watches" and found site which explained how. You set day of week and date to previous day and date and then move watch time ahead until day and date are correct. Then set watch time. Seems to work.

url: www.pulsarwatches.com.au/manuals_pdf/94_1.pdf