Can't seem to get AM & PM set properly - Watches

Hold down the adjust button bottom right then press the mode button top left you will notice the a or p that stands for am/pm will disappear & reappear. If you have an a or p on your display then you are out of military time.

or

1. In TIME mode, press and hold SET/RECALL. Time zone will flash.
2. To set, push + or - to select first or second time zone.
3. Press NEXT. Hour digits flash.
4. Press + or - to change hour including AM/PM. (Scroll through 12 hours to get to AM/PM).
5. Press NEXT. Minute digits flash.
6. Press + or - to change minutes.
7. Press NEXT. Second digits flash.
8. Press + or - to set seconds to zero.
9. Press NEXT. Day of week flashes.
10. Press + to - to change day.
11. Continue pattern to set month, day of month, 12-hour or 24-hour time display, MM.DD or
DD.MM date format, turn hourly CHIME on/off, turn BEEP on/off. If you select BEEP on, a
beep will sound every time you push a button (except INDIGLO).
12. Press DONE to confirm and exit or NEXT to continue and set second time zone, if desired.

probably because you have it set to 12 pm midnight and not 12 noon so at 12 noon it is actually midnight when the date will change
reset the time of the day to am or pm and any pm settings will change the date at 12 midnight.

Pull crown out 1 click to set day/date, set to one day behind actual date... Then, pull crown out an additional click to move hour/minute hands around to set exact date by hour/minute a complete 12-24 hour revolution if necessary to get AM or PM accurate for the proper day/date. :)

This depends on the watch. But first you have to ensure that when setting the watch it is set to AM or PM depending on what time of the day it is. Once this is set the date will automatically change when the day comes to an end.
Hope this solution has been helpful?

I think the only place you will get themis the maker. Below is an extract from their web site which gives you contact information. Try speaking to them to find out how you can get more links.


INTERNET CUSTOMER SERVICE Available: 8:00 am - 6:00 pm CST, Monday to Friday. 7:00 am - 10:00 pm CST, Monday to Saturday. Sunday 10:00 am - 8:00 pm. 7:00 am - 8:00 pm Monday to Friday and Saturday 8:00 am - 5:00 pm CST. 7:00 am - 8:00 pm Monday to Friday and Saturday 9:30 am - 6:00 pm CST. We are closed on company observed holidays. To place an order, or for any other questions please call 800.699.0557. Note: Your satisfaction is 100% guaranteed. All items in your order can be returned to Emporio Armani Watches for a complete refund if you are unsatisfied. Return instructions will be in the box when your order arrives.
WARRANTY & REPAIR 800-277-4013 Available M-F between 8:00am - 6:00pm CST
[email protected]

If it is like mine you press the test button until you hear the chime. Wait for the hour chime to go and count it. If it chimes once for 1PM and you need it set to 6PM then you press the test button to reset the chime and repeat press the button 5 times. This will set the chime to 6 PM. If you get lost on the time press until it makes no noise. This means you are 11PM or later and continue to then press until it makes noise again. Count the hour chimes and you are at the count in the AM. Repeat the steps and keep pressing to get to the proper AM or PM hour count..

mcdevito75 here, Many Casio Watch Models out there, I'll bet however your Casio is displaying say 1 AM rather than 1 PM as it should if the time is indeed PM after 12 noon, if so, this is why the date is changeing at 12 PM rather than, 12 AM simply re-set your casio and make sure the time of day is set at PM for time after 12 noon and AM for time anywhere before 12 NOON. Also, as you set your Casio, look for anything that may give the hint of Military time, this may be revilled as 12 hours or 24 hours, if you have anything like this, make sure it's set for 24 hours. If you have additional problems, visit a small watch repair shop in your area. Again there are many, many Casio models out there and without your watch with me it's difficult to be more accurate.

advance the hours. The first time you go through the 24 hour cycle, it will be in am pm mode, the second time in 24 hour mode, the next time in am pm. Just keep advancing the hours until it comes up the correct time

While in (digital) Clock mode (NOT in alarm setting mode!!!), push the bottom-right button and then the top-right, to toggle alarm on & off.

When you are setting the hour time on your watch just press the pm key on the keyword next to the number 6. this will change to am or pm.