Powers on, fan is running and lights are blinking, but no video signal output. Tried flashing the board like one person suggested, and replaced the RAM with a new stick, and still, i dont get a video signal to my monitor. Any suggestions?
Hi! there,
there are common factors why no video on your screen.,right one factor is ram,the other are video card,processor and monitor
you can't trouble shoot with out other computer available,tester cann't detected all this,it make easy to parts to parts.disconnect cd room,hardisk and floopy also disconnect your video card and memory card put video card and ram one by one (if youhave nultiple ran) to other computer ,be sure other computer is run good and observed, if no video take the previous video card and put back if there video,possible your video card is busted,or try to put other video card and ram to your pc be sure this are good,if ok select your own part that you think is busted since you said your ram is good,put back to your pc observed.....replace aby busted parts,
take all precaution avoid electric shock wear safety shoes.regards and have a nice day
151 views
Usually answered in minutes!
×