How can I reprogram my HPcompaq tower for internet service?

You have to call the provider to activate the phone. One they get the ID number from your phone it can be activated. If it's already activated, you must be in an area with 0 tower signal

put in a support ticket on straight talk's facebook page. sounds like your phone needs to be reprogrammed.
also make sure that you have good native verizon coverage, because straight talk verizon phones use only
verizon towers and are non roaming.

There are three variants for this case: the mini-tower (which you say you don't have), the "Small Form Factor", and the "Ultra-Slim Desktop".

The "Small FOrm Factor" has an internal 3.5" bay that will support a second HDD.

This is a problem that service providers are constantly combating, with more than 3,500 new cell towers being built each year. While some areas receive better signals than others, it is possible to reprogram one's cell phone so that it more efficiently utilizes the cell towers in the area. ''If you are interested about this information so you can must visit this site'' ...... http://odonnellfamilydentistry.com/

Did you try updating your phone to local cell phone towers?
Here's a quote from ehow.com: "While some areas receive better signals than others, it is possible to reprogram one's cell phone so that it more efficiently utilizes the cell towers in the area. The process is slightly different for each service provider."

Read more: How to Update Your Cell Phone to All Local Towers ' eHow.com http://www.ehow.com/how_5959192_update-cell-phone-local-towers.html#ixzz2O1ndWKtM

The MTX9250 is usually used as a trunking radio. It is likely programmed to work with a system of towers and will not work radio-to-radio without being reprogrammed. Stop by your local Motorola dealer and inquire about FCC licensing and reprogramming the radios to a simplex (radio-to-radio) frequency. Or if the dealer is the manager of the trunking tower system this radio was originally used with, they may be able to offer you service on their system.

Best regards.

its simple.. open your computer and remove your cmos battery located on the motherboard ..

Without more information and assuming that you do not want to connect to the internet and assuming that you changed the tower case only, your motherboard system has 'recovered' itself (possibly due to a back-up battery on the motherboard). By disconnecting your power supply, RAM, and HDD (possibly the CPU from the board also), there is a good chance that it will repeat the process a second time and you can decline the activation process and use the computer. Should you decide to establish an interent connection, you may want to check w/your brother and make sure that he hasn't already registered the computer. I hope this helps (or is in the ballpark).

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=445441&lc=en&cc=us&dlc=en&lang=en&cc=us

Follow the above link and input which operating system you have. Click on Deskjet Full featured software/driver link. Scroll down a bit until you see the "Install Now" button. Follow the directions and you should be all set.

Please let me know if you have any questions, or if you have any trouble.

Hope it Helps!