Admiral universal remote g0152aj code button location

code of Nvision tv https://electrohelponline.blogspot.ca/ http://www.remotecodelist.com/ Codes for Universal Remotes How to Program Universal Remote

003,002,007,001. Try these codes. If you wish to get more details, check the sites linked here. Setup code list, and setup procedure to many popular brand remote controls are given. http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy.

Check these codes: 1006, 1045, 1054, 1094, 1125, 1167, 1133, 1230

rca site http://rcaaudiovideo.com/remotecodefinder/ select models and your set

Code For Model RCU300
Code 001 046 047 083 095 173 191
http://dl.owneriq.net/3/37d7da26-1b3b-4dfa-b1ea-29c9aa7e4c63.pdf
good luck rate it pls :)
Code 191 for Admiral TV

Most universal remotes work the same. Try this.
Here you go. This will work with most all universal remote controls. If you don't have the code do the following:
Automatic Programming
With automatic programming, the remote control tests all the codes available on the Code List and assigns the correct code for the selected device. Although this method can be more time-consuming, it eliminates the need to look up codes and enter them manually.

1. Turn off the device with which you want to use the remote control.

2. Press and hold the corresponding button on the remote control
(TV, VCR, SAT, DVD, CAB or AUD) until POWER INDICATOR illuminates. It should take a couple of seconds for the light to remain solid. The remote control is in programming mode.

3. Press and release power button. The POWER INDICATOR flashes once and stays on indicating the unit is in Power Scan mode.

4. Press CHANNEL up or CHANNEL down repeatedly until the device turns on.

5. When the device turns on, press OK to store the code.

Note:
• To exit without storing the code, press BACK.
• T he unit will search for the next code or the previous code if you press
CHANNEL up or CHANNEL down after the device turns on. (go slow you need to press OK when the TV turns on) if you mess up turn TV off and start over.
6. Press any other button. If the device responds, the remote control has been programmed. If the device does not respond, repeat steps 2-5.

Fill free to ask me questions about anything..........................

I can help you to program your One For All Big Easy URC-3220 Universal Remote to control your Admiral TV.



Please review my Fixya Tip posts for:

1. Searching for the proper codes, or
2. Downloading the URC-3220 users manual / owners guide. This contains all the codes for the brands of devices your remote can control.
   

I hope that helps.

Yes , Most Rca will not work so you need something that has more codes, Let me give you a website to checkout www.remotes.com, These people will not only help you but they will find a remote that will work for your TV, Give them a call as well they do have codes and remotes for all TV's you be happy you did. Do not shoot the messanger give a good rating.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

You will need a menu button to get to setup or channels for you to autoprogram the tv to find ALL the channels. AUTOPROGRAM is the word you need to find. If there is a menu button on the tv, then you can probably do it from there. If not, then you need the original remote from Admiral or at:

http://www.replacementremotes.com/tvcodes/index.html