My printer won't print.

You may have been impacted from a printhead issue affecting a limited number of our devices. Please visit the Lexmark support page to determine if your printer is affected with the printhead issue. You will be asked to enter your model and serial number. Also, make sure your printer is updated. The firmware update will help give you a highly reliable print system.

Click here to validate your serial number and/or update your firmware.

What's the error message on display? anything regarding paper size? Please check it.

Am not able to print anything and on the screen popup a window that shows ERROR B200 how can I solve the problem if I do not have the manual.Please advise on how to correct the problem.Thank You.

tony

Wordpad doesn't ask you where you want to print to. IT automatically prints to the Windows DEFAULT printer. Check that this set correctly in control panel under "printers and Scaners". It should have a tick on it. Ian.

That is a magenta toner empty message, either the magenta cartridge is empty or there is an issue with the magenta toner dispensing.

Check the paper being used against what the printer manual recommends.
Fan the edges to ensure cut edges are free.
Don't use damp paper, ie high humidity may cause drag.
Leading edge should be flat, not curled.

How to repair error "print unable 4F" in the Brother dcp-135c .
thank alot.

It means "Paper Feed Error" Check your paper in the tray. Make sure it is seated securely with the guides. Take it out and fan the end of it.
Make sure your printer is set for the correct paper size you are using and that you are attempting to print on that size.
Turn off the printer and unplug it. Open the paper jam door and gently push the paper roller up (forward) until you hear a click.

while you are there look again for any tiny scrap or jam of any kind.

Re-close the door. Plug your printer back in. Restart your computer. Turn your printer back on.


Let me know if this helps! And thank you for using Fix YA!

Somewhere in the addressing there is an error.
You can call 1-800-821-2797 and ask for second level support. They can narrow down your problem.
116-XXX or 119_xxx codes normally have to do with addressing issues within the network.

Went to online chat with Lexmark. FREE.

They offered to replace cartridges as they felt the ink was dried out in one, and the ink jets in the other were damaged.