I am using XA3051 speaker for seven years now. Now remote alone is not working. Can i get the remote only.

available from the diabetics association
with whom you should be in close contact for needles and test gear

Notifications sounds from either external speaker or headphones, but never from the ear piece volume. Your question suggest that the external speaker is damage but it only works on external speaker. Try using a headphone or a bluetooth to make calls, if they work, then you need to fix the external speaker.

What make and model phone?
Were the batteries in the phone for seven years? If so, you'll most likely need a new battery pack.

If you can find a universal remote it could work however you would have to be able to locate or contact the manufacturer in order to get the codes need to pair the remote to the stereo. I'm not certain it work this way with stereos, I'm just assuming if you can do it with a tv you ought to be able to do the same with a stereo lol

Its because u probably u have factor amps like my car that has infinity sound system I used the wire harness adapter that plugs into the factory harness u need to plug the wire that is alone and not in the factory plug into the power antenna/remote wire sould fix that issue

It might be that when the speakers get warm after running for a while, component starts to breakdown and causes the noise. This will require a expert to check and fix

Or it could be a cable problem. Try wiggling the cables to the speakers and see if the squawking stops or changes. If so you could replace the cables.

If you plug it in to your computer, a freeware program may still be able to recognize it and give you exact model numbers and IDs--worth a shot, and you'll love the program anyway--Belarc Advisor. It lists all hardware and software, model numbers, keys, etc. Hope it helps.

You may be out of luck. Apparently, Altec is no longer supporting this product (2002) and the user's manual provides no specifications for the power supply. You can try asking them at 1-800-ALTEC-88 (1-800-258-3288) or Email: [email protected]

The manual is at http://audio.manualsonline.com/manuals/mfg/altec_lansing_technologies/xa3051.html

There is a belt most likely under the tray that has stretched. replace it with the same size and it should be ok.