Toshiba 26AV500A start up problem

It would be best to bring your phone to diagnose the problem. It could be a number of things, from software to hardware, so your best bet is to bring the unit to a service technician

I have the same issue with mine which started a couple of months ago and has only gotten worse. I've been googling this and found that it could be the convergence module(s), apparently there are 1-3 of them and ALL of them should be replaced. I'm not sure on a cost, but I'm guessing it won't be cheap. I think we are just going to get a new tv, with the prices for LCD's coming down this will probably be a cheaper option. Good Luck :)

If you have a normal picture with lines through it, or if the picture jumps, tears or rolls, you have a Hyper Board that is failing. The last I checked, the Hyper Board is not available from Toshiba and has not been available for a number of years.
I hope this helps,
Skyassoc

Check the choke when cold. When its hot take notice that its opened. Upon starting next time when its cold look at the choke and see if its closed fully. It should be. If not push the throttle all the way open and let it retract closed. The choke should close when the engine is cold. If it does not the vacuum break is shot which should be the rear one that controls the choke. Yours may be on the front since some are but very few are made on the front

Only advice I have is use the Warranty. Take it back to the store.
Sorry I can't help more.
Good luck

you will need to change the screen resolution in the external monitor settings, as you must have them set at 800x600 or similair and it will need to be atleast 1280x800, just right click on empty space on desktop and select graphic properties

my computer power is on and my computer also start quick but the screen of the this moniter start after 15min to 30mins this problem how to solve.

sorry its not an easy fix at all. im sorry wat you have to hear, but do you have kids? if so, they probably bumped into or hit the screen. that would result in permantly damaging the screen

I've had the same problem for a while now too.
The camera has been useless and Im looking to replace it.
Im sure this problem hasnt got a simple fix and im better off buying a new camera!
Id like to here if someone managed to get it fixed thou ?

Thanks

I just spent an hour trying to fix the VIZIO with the same problem. The screen had no picture at all, but could hear the sound perfectly!! But we i figured out the solution! UNPLUG THE CABLE BOX AND LET IT RE-BOOT! and it WORKED!!!!!