Question about JVC DR-MX1S DVD Recorder/VCR

Open Question

Blue light flashing with "loading" on display

Vcr/dvd won't repsond to anything, play, stop, on, off. tried unplugging and plugging, but still the blue light and loading flashing.....thanks.

Posted by on

  • 1 more comment 
  • Anonymous Dec 14, 2008

    HAVE THE SAME FAULT MY UNIT HAS SEEN VERY LITTLE USE & NOW I NEED TO USE IT TO EDIT A VIDEO IT CAN NOT BE USED

  • Anonymous Dec 24, 2008

    I also have the flashing blue loading thing going on. I left unit unplugged overnight, then plugged it in. It booted up with the same symptom, but then it reset when I held the power button in for a few seconds, which is how it's supposed to work without unplugging. The hard drive has never been right as it wouldn't shut itself off when through recording...EVER! I have noticed if I engage the hard drive in any way now, the flashing loading thing comes back. I am going to attempt to empty the memory, then never use hard drive again. JVC??

  • dsfdsfs Apr 22, 2009

    I have the same problem on my unit. Purchased in April 2005, saw little use except for 8 or 10 home movies uploaded. As I'm out of warranty, its been sitting faulty for nearly over a year and I am worried sick on how to recover my precious home videos.

×

4 Suggested Answers

Cerfer39
  • 709 Answers

SOURCE: Cyberhome DVD writter not decting DVDs . Getti g a disc error.

HI Johnny,

Any chance someone went near the DVD/VCR and dusted with some Pledge or any kind of dusting spray? It sounds like something has got the DVD driver chip acting crazy. May be a faulty disc tray switch telling the controller the door is opening and closing all the time. If its brand new, do you have an opportunity to take advantage of a warranty claim?

Posted on Nov 15, 2007

SOURCE: JVC DRM10 DVD Recorder Problem

This unit is showing and error message "Disc Not Recordable" with a maxell DVD-R 1-16 Speed Single Sided Recordable DVD.

Posted on Feb 06, 2008

SOURCE: continuous flashing loading

Contact JVC @ 800-252-5722, the "loading" is a known bug and they will fix this defect at n/c even if it's out of warranty period.

Posted on Mar 31, 2008

  • 1 Answer

SOURCE: jvc dr-mv5su blue power light blinks on and off whole machine fr

Throw the unit away its a piece of ****!

Posted on Jun 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cyberhome DVD writter not decting DVDs . Getti g a disc error.


HI Johnny,

Any chance someone went near the DVD/VCR and dusted with some Pledge or any kind of dusting spray? It sounds like something has got the DVD driver chip acting crazy. May be a faulty disc tray switch telling the controller the door is opening and closing all the time. If its brand new, do you have an opportunity to take advantage of a warranty claim?

Nov 15, 2007 | JVC HR-XVC19S DVD Player/VCR

1 Answer

Vhs is stuck in machine. Won't play and won't eject.


There are any number of reasons why it won't play. The loading basket is jammed, the video tape has got tangled up in the mechanical section of the vcr or the loading gears are stripped. Unplug machine and remove top, [screws side and back] if the tape is spewed carefully remove by cutting it and clean tape particles, for any other problem have a technician check it out.

Jun 28, 2012 | Sony RDR-VX530 DVD Recorder/VCR

1 Answer

My sony dvd slv-300p blue light progressive scan light is on and i cant do anything ?


my sony dvd vcr combo has a progressive scan flashing light when plugged in. i put a vcr in and now it's stuck. none of the buttons seem to be working. it is making a clicking sound inside on machine. how can i get this thing to work again?

Jan 23, 2011 | Sony SLV-D300P DVD Player/VCR

1 Answer

DVD player will do nothing


Ok so I took the cover off to see if I could figure out the problem. Don't have a complete solution, but I did get somewhere. There is a silver cylindrical motor attached to the eject mechanism wheels on the VCR side. When I unplugged the tape from the back of the little motor, the progressive light goes out and the sound from the motor stops. When I manually turn the wheel/arm attached to the motor, the other wheels/gears turn and I can manually eject the tape. Also when I get to a certain point, my progressive light starts flashing like yours was. Anyway it all seems to be related to the little motor. I figure if you replace that, it would work. At least that is what I might try, I'll keep you posted.

Aug 27, 2008 | Sony SLV-D300P DVD Player/VCR

1 Answer

DVD stopped working and cannot do setup.


You probably need to reset your DVD/VCR/Combo. Go to www.samsung.com. Go to <Support>. In the search box, type in the model of your DVD/VCR/Combo. Or type in, >how to reset DVD/VCR/Combo<. Each model has different reset method and there are hundreds of models!

853. How To Reset Your Samsung DVD Player STEP 1
STEP 1. DVD Reset List
Samsung DVD players have a built-in reset procedure that resets the DVD player to the factory defaults. You can use the reset procedure to reset settings that don’t work with your TV or to resolve issues such as unit lock up. To run the reset procedure, you press one or more buttons on the front of the DVD player and hold them for at least fifteen seconds. The buttons your press depend on the model you have.
Important: For the reset procedure to work, you must press the buttons on the front of the player, not on the remote control for the player.
Below is a list of all Samsung DVD players and the buttons to press to run the reset procedure.
DVD511 - Stop / Play
DVD611 - Stop / Play
DVD709 - Stop / Play....


Many, many other models follow but cannot be listed here because of this site's text limitations.


Good luck!


Jun 15, 2008 | Samsung DVD-V4600 DVD Player/VCR

2 Answers

DVD Player does not work


General Problems
Player won’t work (locks up)
• Try unplugging the AC power cord and plugging it back in.
• Reset the DVD/VCR: on the front of the unit, press and hold the STANDBY/ON button while you press and hold the STOP button—wait at least 3 seconds
before you release both of the buttons. You’ll need to set up your menu preferences because this Reset Procedure returns the DVD/VCR’s menus to the
factory default settings and also erases the contents of the Disc Library.

Mar 15, 2008 | DVD & Blu-Ray Players

1 Answer

Samsung 3650 dvd/vcr player loading problem


Sorry, no suggestion other than don't buy Samsung. That's my conclusion after owning the same model. It worked fine for a while, but now won't load any DVD... usually. Sometimes it will play one, but more often it won't. Mine tries to load ("Loading") for a long time, I hear the DVD spinning, then ultimately the screen displays "This disc cannot be played" or something to that effect.

Nov 25, 2007 | DVD & Blu-Ray Players

1 Answer

JVC DVD PLAYER/VHS COMBO


Besides bounching this off a concrete wall for some satisfaction, try unplugging it for a couple of hours at least four hours and then plug it back in. Wait for it to stop loading and you may be able to watch one movie, two if your lucky before it starts flashing again. I've even sent mine to JVC for repair and got a year out of it but it's flashing again. This JVC item is the biggest piece of junk out there, if you read up on it it's had nothing but problems. Save yourself a lot of headaches and buy a new one and chock it up to experience.

Nov 15, 2007 | JVC HR-XVC19S DVD Player/VCR

Not finding what you are looking for?
JVC DR-MX1S DVD Recorder/VCR Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC DVD & Blu-Ray Players Experts

The Knight
The Knight

Level 3 Expert

68258 Answers

kakima

Level 3 Expert

96467 Answers

Rod
Rod

Level 2 Expert

224 Answers

Are you a JVC DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...