Your refrigerator uses the common GE WR55X10942 control board. On most models you can just swap out the control boards. Some models require a few additional steps, you will have to check your serial number to see if that applies to your model (see instruction sheet included with the control board).
First unplug the refrigerator.
On the back of the refrigerator, there is a panel. Remove the screws and the panel cover.
Unplug wires from the old control board (note where the wires go), and plug them into the new control board.
Plug refrigerator back in and test out.
For more detailed instructions, and pictures click the link below.
How to replace WR55X10942 control board
680 views
Usually answered in minutes!
×