20 Most Recent
KitchenAid KERS807SSS Electric Kitchen Range - Page 9 Questions & Answers
My kitchenaid range touch pad won't work- no errors displayed, can't turn oven on
careful here. The board needs to be replaced and can cost as much as $300 to $500. Half the cost of a new range. They also have been known to turn on the cleaning mode when baking. Then the oven door locks and cannot get in. Then what ever you have in the oven really gets black and starts a fire. This happened to me a while back. Had to shut off the range breaker and wait til the oven cooled of to open door. Really smelled. Had to buy a new oven because we could not get the burned smell out. I would suggest not to use the oven til new board is installed. Or buy new oven. We bought a AQUALIFT clean oven. It cleans at 250 degrees. Not the high temp of 500 degrees plus.
Front burner does not light and has no spark. Do I change the ignitor and if so, how is this done?
The spark switch attached to the gas valve is bad, but usually you have to replace the complete switch string. Yes, you are right, all the switches are wired in parallel, and all the ignitors spark at the same time, so if you get 1 burner sparking, they will all spark, and now you can turn on the gas valve with the bad switch, and it will light too. (That's your cheapest and easiest solution!) If you need further help, reach me via phone at
https://www.6ya.com/expert/ronald_e6b9572cebe3ad27
How to Install oven control board
Hey! why don't you ask a HARD QUESTION! Really? You have a board in hand AND NOW! You want to install it? Is this electric or gas (stalling) doesn't matter! Here is a video to explain it best. Oh I have a question? Do you buy Bullets first and then go get the Gun? Never Mind....
Not finding what you are looking for?