Samsung RS2534 Side by Side Refrigerator "display codes 1" Questions

1 - 4 of the diagnostics to start the defrost mode Self Diagnostics To enter Self Diagnostic mode, both temperature control panel displays must be illuminated. A display can be illuminated by pressing

display. When a test code has been entered, the displays will flash to confirm the test code. Press any button other than a temperature adjust button to begin the test. When testing has been completed

display. When a test code has been entered, the displays will flash to confirm the test code. Press any button other than a temperature adjust button to begin the test. When testing has been completed

display. When a test code has been entered, the displays will flash to confirm the test code. Press any button other than a temperature adjust button to begin the test. When testing has been completed

...1) Press and release the "SET button four times. "cnd" will be displayed on the screen. 2) While "cnd" is displayed, press and hold the "SET" button. The display will show the number of weeks the ...

1 display code ? The cooler isn't working On avanti model WC681BG-2 I tried to see what the F-1 Code is but found very little information other than talking to Avanti Customer Service 800-220-5570 You

...display 00 or flashing 00. Note: The program code for this refrigerator is located on the serial plate on this unit after the word Code. 1. Open the fresh food door and hold the fresh food door light ...

...display a 0 and 3 audible beeps will sound at the temperature control panel. This is not a failure if the unit is not equipped with the Quick Chill option. Thermistor test results: ? P = Pass ? 0 = ...

...1 week old. A few days ago it started making a noise that sounded like a motorcycle just after you closed the refrigerator or freezer door. (Like something kicks on to cool it down after the door had ...

...1 lights bar flashing on freezer and wont cool The one light flashing on the display is an error code.  Depending on which light is flashing will tell you what the error code is.  Check the ...