LG WM-1832C Front Load Washer "washing machine spin low speed" Questions

...machine. Now, if you are successful washing with the lowest spin speed, you can hold the " Spin Speed " button in while pressing on the power button. Release power button. Now release the spin speed ...

spin it out faster, just turn the machine back on after it has finished a cycle on the low spin speed and just push the spin speed button without selecting a cycle. You can touch the spin speed button

...washing machine?? LE stands for Load Error. You may have a bad hall sensor, but more likely have an off balance or very heavy load which you were trying to spin at a high speed. For heavy / bulky ...

...washing these items, set the spin speed to low. The machine will most likely be able to handle that. If you want them spun out faster, then AFTER the washer has made it through the cycle on low speed ...

low spin speed with bulky loads. For this load now, just put power on and without selecting a cycle, push the spin speed selector button until a low speed comes up (should be about a 14 minute display

...spin, allowing the machine to reach a higher spin speed without the Unbalance Error code showing up. Of course, you want to make sure the machine is on a solid floor with all the legs adjusted ...

...machine to just spin a load? It became unbalanced and I adjusted it and now just want to spin the water out? Turn power on. Without selecting a cycle, push the spin speed button to select the spin ...

...machine wont run, i replaced the drain pump and thermostat sensor. after replacing drain pump, my washer ran almost a full cycle, stopped during the last rinse wont run now. It turns on but doesn't ...

washing machine will wash but when it comes to the spin cycle it stopped and sits there and grinds and then UE comes up. So currently I am not able to use my washing machine and no appliance repair in

...machine is shaking terribly, shut the spin down and try again. Our LG 2688 is on our 1st floor (wooden floor). Without SpinSense, the vibration was terrible and with it, it is tolerable. For some ...