Pentair 400k Minimax Ch Ng Mv Heater "heater tripping gfci" Questions

...going out. The most common cause for tripping GFCI's are a heater that has a ground fault. A distant second is a bad GFCI. If it starts to run, then quickly trips, it is almost certainly the

...gfci. (check the braker) You can test this by disconnecting the heater leads and see if it will reset. If it still trips try disconnecting your equipment one at a time, ie. blower, ozone, circ pump, ...

...tripping when I connected power to the Heater. I have totally took the heater apart to look for any frayed wires or a bad ground but I do not see any. I have also replaced the GFCI just in case and ...

balboa vs501z trips gfci gfci tests ok but trips when connected to Balboa controller remove both copper ends that are mounted to the heating element. reset gfci and turn power back on.

...tripping so the heater will not operate Hello, Assuming there aren't any other faulty electrical components your GFCI will trip as a result of the heater element short circuiting.Typically this ...

...tripping gfi heater ran for about 5 min, began heating then tripped gfi. Reset gfi and the heater trips almost immediately each time now. You may have a short or leak that is introducing moisture in ...

...tripping but only when its being used and people are actually in the water. It wont trip by running the pumps, heater, or lights and using them all at once or individually. I thought it was a bad ...

in outlet, look at the GFCI plug assembly as well... You can also try disconnecting the blower, pump, heater, etc, from the control pack (one at a time) to determine which item is causing the tripping

Dream Maker spa GFCI plug was all corroded. I cut off the standard plug that was corroded and installed an industrial grade 120VAC plug with the proper polarity. Plugged the spa back into the GFCI ...

Gfci trips heater not turned on I have a Pentair Minimax 100 and as soon as I plug it into the GFCI outlet, the outlet trips. The heater is not even turned on yet! Tried it into 2 different outlets ...